madco barrels

[lonerider43]

you guys with madco's [308 1/13t],how many rounds do you get out of em before they "go off"

sean.

[KHGS]

you guys with madco's [308 1/13t],how many rounds do you get out of em before they "go off"

sean.

That is a bit like asking how long a piece of string is, there are many factors that affect the life of a barrel.
1. Chambering (caliber).
2. Loads, amount of powder burnt and the chamber pressure it is run at.
3. How it is cleaned.
4. How fast it is shot.
Just to name a few of the factors. That said, my observations indicate that on average, Maddco barrels last as well as any other quality stainless steel barrel.
Keith H.

[lonerider43]

well,mine has done just over 4000 rounds.
should i looking at getting a new one or hold off a bit longer ?

[Tim L]

well,mine has done just over 4000 rounds.
should i looking at getting a new one or hold off a bit longer ?

I would be looking to getting one chambered and fitted. Tune it up then swap back to the 4k barrel. As soon as the current barrel stops performing, swap them out.

[lonerider43]

thanks tim

[KHGS]

well,mine has done just over 4000 rounds.
should i looking at getting a new one or hold off a bit longer ?

At 4000 rounds your barrel is in the twilight of it's life, you should be well into the planning for a replacement which could take up to 3 months to get a replacement.
Keith H.

[KHGS]

well,mine has done just over 4000 rounds.
should i looking at getting a new one or hold off a bit longer ?

At 4000 rounds your barrel is in the twilight of it's life, you should be well into the planning for a replacement which could take up to 3 months to get a replacement.
Keith H.

[Joel01]

Any of you guys get barrels fitted by maddco? Or use your own smiths? Saw this thread think I’m in the same boat

[willow]

Any of you guys get barrels fitted by maddco? Or use your own smiths? Saw this thread think I’m in the same boat

I could be wrong and am happy to be corrected, but to my knowledge Maddco don't fit barrels, that's where your Smith' comes in.

[Rich4]

They definitely will fit barrels, I’ve not had one done by them but Nevs reputation is solid.

[Lachlan]

Maddco definitely do chamber and fit barrels. Although he’d be the last person I’d take my rifle to.

[Rich4]

Maddco definitely do chamber and fit barrels. Although he’d be the last person I’d take my rifle to.

Out of interest why is that?