Weaver T36 ?

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Message
Author
Eddy
Posts: 27
Joined: Sun Dec 30, 2012 8:23 am
Location: Waikerie; SA

Weaver T36 ?

#1 Postby Eddy » Fri Jan 04, 2013 5:55 am

... any good?

Seems to be a few getting around on UG, one just down the road a bit.
All seem to be on the market because somebody bought it, then "changed the plan" ... one had been fitted and then removed without a shot being fired, and another not even fitted.

So ... was the change due to wanting to go to something else more up market?
... or to something that actually worked? (ie weaver T36 is garbage)

Malcolm Hill
Posts: 328
Joined: Fri Aug 25, 2006 9:40 pm
Location: Mid North S.A.

#2 Postby Malcolm Hill » Fri Jan 04, 2013 6:20 am

Hi Eddy
There is nothing wrong with the T36, they are a good scope. However in summer in SA we have plenty of mirage at most of our ranges and a fixed power scope of that magnification can be difficult to use. For our conditions we are better suited to a variable power scope that can be wound back a bit to get a clearer picture of the target. I would suggest you go to a range where you can check out a few scopes on a hot day to get an idea of what works best for you- possibly catch up with the Loxton crew on that.
Regards Malcolm.

Eddy
Posts: 27
Joined: Sun Dec 30, 2012 8:23 am
Location: Waikerie; SA

#3 Postby Eddy » Fri Jan 04, 2013 6:41 am

Mirage :idea:... doh! ... now why dint I think of that .... :roll:

Thanks Mal! :wink:

AlanF
Posts: 7495
Joined: Wed Jun 15, 2005 8:22 pm
Location: Maffra, Vic

#4 Postby AlanF » Fri Jan 04, 2013 9:37 pm

I agree with Malcolm. I have a Weaver T24 as a backup scope - they have 1/8 min clicks, and a reputation as being very reliable mechanically, but not always good optically. I do use mine occasionally, but rarely when mirage is expected. I'd expect a T36 to be even less suitable in mirage.

Alan

Gtown
Posts: 39
Joined: Tue Jan 10, 2012 11:46 pm

#5 Postby Gtown » Sun Jan 06, 2013 11:08 am

Hi Eddy

I have had a T36 on my Omark for about 12 months now, I can't complain about it, it has performed flawlessly (unlike the user!!... :? )

It has good optics from 300 to 900 yards, as mentioned, mirages can, from time to time, be an issue, but isn't that big a problem, in fact, in some respects it has been the opposite, it has taught me to read the wind a bit better and patience to wait, watch and reevaluate using the mirage.

As a starter scope on a budget I can strongly recommend it. I brought mine from off this site for under $500.

Paul.

Eddy
Posts: 27
Joined: Sun Dec 30, 2012 8:23 am
Location: Waikerie; SA

#6 Postby Eddy » Sun Jan 06, 2013 4:53 pm

Gtown wrote: mirages can, from time to time, be an issue, but isn't that big a problem,
where are you shooting?

At Waikerie, (and Loxton) we get mirage issues even through open peep sights lol ...

Gtown
Posts: 39
Joined: Tue Jan 10, 2012 11:46 pm

#7 Postby Gtown » Sun Jan 06, 2013 5:15 pm

Goulburn.....The four corners of the earth for wind!

bruce moulds
Posts: 2900
Joined: Sun Jun 19, 2005 4:07 pm

#8 Postby bruce moulds » Sun Jan 06, 2013 5:30 pm

p.m. pestbird.
he uses a 36 successfully and is a successful competitor.
keep safe,
bruce.
"SUCH IS LIFE" Edward Kelly 11 nov 1880
http://youtu.be/YRaRCCZjdTM

Paul Janzso
Posts: 573
Joined: Tue Dec 13, 2005 1:10 pm
Location: Mackay QLD

#9 Postby Paul Janzso » Wed Jan 09, 2013 1:39 pm

Hi Eddy
We're you at Light River OPM last Saturday ? As we may have been talking about rifle calibers.
I have always used Weaver T 36 rifle scopes ever since I started shooting F Class Open.
I have never had a failure and they always return to zero.
I make sure I have focused the paralax just like any other scope and away I go.
The only issue I have with the latest scope is the turrets, they go from 0-4 minutes then back down to 0 . I have overcome this by having the turrets engraved with external arrows to show which way to wind for elevation and windage.
I hope this helps
Cheers
Paul Janzso
Time's a wasted wot's not spent shooti'n BARNARD 300WSM's


Return to “Equipment & Technical”

Who is online

Users browsing this forum: Google [Bot] and 37 guests