Could any one please tell me if there is any one making adaptors for omarks these days.
Thanks
Omark adaptors
Moderator: Mod
-
- Posts: 166
- Joined: Sun Apr 02, 2006 8:29 pm
- Location: MIA
Omark adaptors
Firepower usally means an increased number of misses per minute. 50 misses are not firepower. One hit is firepower
-
- Posts: 166
- Joined: Sun Apr 02, 2006 8:29 pm
- Location: MIA
-
- Posts: 473
- Joined: Tue Aug 30, 2005 6:53 am
- Location: Maclean NSW
True flite also make an adaptor for the omark. These have a feature that the locking lugs are aprox 0.03 inch thicker and this allows the gunsmith to reface the locking lugs of the bolt head to match the new adaptor and set the camming action to give good extraction with a worn bolt handle and matching wear in the action .
The other point to consider with an adapptor is the position of the recoil lug as this may require the front hold down bolt to be repositioned.
Ken L
The other point to consider with an adapptor is the position of the recoil lug as this may require the front hold down bolt to be repositioned.
Ken L
-
- Posts: 344
- Joined: Wed Oct 19, 2005 11:04 am
I also had my old bolt head refaced to match up and my smith tells me I could do it one more time if needed but my adaptor is MAB.
Have seen a Maddco adaptor also I think.
Regards
Rob Alman
Have seen a Maddco adaptor also I think.
Regards
Rob Alman
______________________________
Fullbore = 5.56mm = 100.20 = smile
A.K.A........THE DREMELATOR
PUT Busselton RIFLE RANGE ON YOUR SHOOTING CALENDAR...THE GOLDEN BULLET...3rd Weekend In May. http://www.busseltonrc.com
Fullbore = 5.56mm = 100.20 = smile
A.K.A........THE DREMELATOR
PUT Busselton RIFLE RANGE ON YOUR SHOOTING CALENDAR...THE GOLDEN BULLET...3rd Weekend In May. http://www.busseltonrc.com
-
- Posts: 127
- Joined: Thu Jan 26, 2006 3:19 pm
- Location: South West of WA
Omark adaptors
Does anybody know what thread is used for the barrel to screw into the MAB adaptors ?
Sam
Sam
Sam
Return to “Equipment & Technical”
Who is online
Users browsing this forum: No registered users and 46 guests