fair enough dood...
sean
Reloading Equipment
Moderator: Mod
-
- Posts: 427
- Joined: Thu Sep 01, 2016 6:55 pm
-
- Posts: 408
- Joined: Sat Feb 08, 2014 6:58 pm
- Location: Barossa Valley
Re: Reloading Equipment
Bigtravoz wrote:http://www.midway-australia.com.au/lee-breech-lock-hand-press-kit/
Inexpensive, accurate, can be used anywhere (including on the couch or on the road or at the range) and I doubt you’ll ever buy a more expensive setup once you have this! Add a scale, powder, primers, set of dies for your caliber and you will have hours of fun!
Plenty good for hunting stuff I agree. Very hard to full length size cases with. How concentric/straight is your loaded ammo?
-
- Posts: 424
- Joined: Sat Sep 16, 2017 5:39 pm
Re: Reloading Equipment
It's all about concentricity, for similar money you can have a basic arber press and a pair of wilson dies and chern out some of the most mechanically acutare rounds money can make. Maybe not on the couch but definatly on the kitchen table. Depending on calibre, qualtiy of action and chamber you may never need to full length resize (certainly the case for my Barnard 6br) I have a couple of Lee peices unfortunalty the Adams auto trickler used a Lee powder thrower and i have their "universal" decaping die which only fits large primers with a large flash hole. I dont like either.
-
- Posts: 293
- Joined: Sat Apr 22, 2017 7:43 pm
Re: Reloading Equipment
Barossa_222 wrote:Bigtravoz wrote:http://www.midway-australia.com.au/lee-breech-lock-hand-press-kit/
Inexpensive, accurate, can be used anywhere (including on the couch or on the road or at the range) and I doubt you’ll ever buy a more expensive setup once you have this! Add a scale, powder, primers, set of dies for your caliber and you will have hours of fun!
Plenty good for hunting stuff I agree. Very hard to full length size cases with. How concentric/straight is your loaded ammo?
I load all my f class using it, concentricity has more to do with your dies than the press. My 243 will put 10 shots in the same hole at 200 yards loaded on it. Don’t see how you think it’s hard to full length size on it! I full length size with it all the time. Just because it’s not mounted to a bench doesn’t mean it doesn’t do what is needed! It actually has more leverage than a lot of bench mounted models, it’s compact and easy to use and transport. Can you take a Dillon progressive to the range with you to try different loads?
-
- Posts: 293
- Joined: Sat Apr 22, 2017 7:43 pm
Re: Reloading Equipment
UL1700 wrote:It's all about concentricity, for similar money you can have a basic arber press and a pair of wilson dies and chern out some of the most mechanically acutare rounds money can make. Maybe not on the couch but definatly on the kitchen table. Depending on calibre, qualtiy of action and chamber you may never need to full length resize (certainly the case for my Barnard 6br) I have a couple of Lee peices unfortunalty the Adams auto trickler used a Lee powder thrower and i have their "universal" decaping die which only fits large primers with a large flash hole. I dont like either.
You go on about concentricity but rely on a powder thrower to give accurate results?
-
- Posts: 408
- Joined: Sat Feb 08, 2014 6:58 pm
- Location: Barossa Valley
Re: Reloading Equipment
Hey if it works for you, all the best. You are getting fantastic results using it.
-
- Posts: 177
- Joined: Tue Mar 08, 2011 11:04 am
- Location: NSW
Re: Reloading Equipment
Bigtravoz wrote:UL1700 wrote:It's all about concentricity, for similar money you can have a basic arber press and a pair of wilson dies and chern out some of the most mechanically acutare rounds money can make. Maybe not on the couch but definatly on the kitchen table. Depending on calibre, qualtiy of action and chamber you may never need to full length resize (certainly the case for my Barnard 6br) I have a couple of Lee peices unfortunalty the Adams auto trickler used a Lee powder thrower and i have their "universal" decaping die which only fits large primers with a large flash hole. I dont like either.
You go on about concentricity but rely on a powder thrower to give accurate results?
I think you will find that the Powder Thrower is attached to a $1500plus set of electromagnetic force restoration scales which weight to a hundredth of a grain...........
Check out the link here https://www.autotrickler.com/auto-trickler.html
Cheers
Michael Singleton
Michael Singleton
-
- Posts: 424
- Joined: Sat Sep 16, 2017 5:39 pm
Re: Reloading Equipment
Singo85 wrote:Bigtravoz wrote:UL1700 wrote:It's all about concentricity, for similar money you can have a basic arber press and a pair of wilson dies and chern out some of the most mechanically acutare rounds money can make. Maybe not on the couch but definatly on the kitchen table. Depending on calibre, qualtiy of action and chamber you may never need to full length resize (certainly the case for my Barnard 6br) I have a couple of Lee peices unfortunalty the Adams auto trickler used a Lee powder thrower and i have their "universal" decaping die which only fits large primers with a large flash hole. I dont like either.
You go on about concentricity but rely on a powder thrower to give accurate results?
I think you will find that the Powder Thrower is attached to a $1500plus set of electromagnetic force restoration scales which weight to a hundredth of a grain...........
Check out the link here https://www.autotrickler.com/auto-trickler.html
It certainly is, I reload for my self and my wife so 72 rnds per week minimum. When not competing, my time to weigh a powder charge and fill a case has gone from 1 minuet to about 10 seconds an I'm accurate to a +/- 1 kernal of 2208 from +/-4 or worse.
-
- Posts: 20
- Joined: Wed Mar 16, 2016 9:33 pm
Re: Reloading Equipment
Nothing wrong with the Lee Universal Decapping die. Mandrels are available from Lee, or easily modified to suit smaller flash holes.
-
- Posts: 882
- Joined: Mon May 19, 2014 7:11 pm
- Location: Townsville
Re: Reloading Equipment
I always have the Lee hand press with me when i travel. It's all i use over at the Bergers.
Concentricity is a non issue if you use a Lee collet die. If you want specific neck tension just buy/make under/oversize mandrels.
The RCBS seating die doesn't rely on the press for seating length, its inbuilt, so no accracy issues there either.
FL sizing is possible although not much fun on 308 but for necksizing and seating she does a fine job.
All that said, I have A Lee cast press in the loading room which has a 1" ram and does its job flawlessly.
Concentricity is a non issue if you use a Lee collet die. If you want specific neck tension just buy/make under/oversize mandrels.
The RCBS seating die doesn't rely on the press for seating length, its inbuilt, so no accracy issues there either.
FL sizing is possible although not much fun on 308 but for necksizing and seating she does a fine job.
All that said, I have A Lee cast press in the loading room which has a 1" ram and does its job flawlessly.
Return to “Equipment & Technical”
Who is online
Users browsing this forum: No registered users and 45 guests