Omark M44

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

6shooter
Posts: 44
Joined: Thu Dec 01, 2011 3:47 pm
Location: W.A.

Omark M44

Post by 6shooter »

I would like to re-stock my Sportco Omark M44 with a walnut stock but the stock maker does not inlet for the Omark. Is there another rifle that has the same inlet profile as the Omark? Any other suggestions? I know this question was posted just a bit down the page but the OP didn't really get a definitive answer.
"Your mouthwash aint makin' it"
ratshot
Posts: 273
Joined: Sat Apr 15, 2006 9:34 pm
Location: Corryong

Post by ratshot »

what stock profile are you after
6shooter
Posts: 44
Joined: Thu Dec 01, 2011 3:47 pm
Location: W.A.

Post by 6shooter »

Monte Carlo style from Richards.
http://rifle-stocks.com/montecarlo.htm
"Your mouthwash aint makin' it"
smlekid
Posts: 50
Joined: Mon Oct 11, 2010 10:39 am
Been thanked: 1 time

Post by smlekid »

I have spoken to my Smith and we are going to go with a Microfit benchrest stock for my Omark you can order these (and the prone stock) in walnut and as a blank you just need to find someone to inlet it for you
http://www.rifle-stocks.com/proneculbertson.htm have a look at these ones
6shooter
Posts: 44
Joined: Thu Dec 01, 2011 3:47 pm
Location: W.A.

Post by 6shooter »

Good choice smlekid. I have had 5 Richards stocks over the past few years and they are very good - after a bit of work to get them to fit exactly. I currently have 2 F-Open rifles with the Benchrest Thumbhole Cheekpiece stocks - 1 x 7mmWSM and 1 x .25WSSM. They are very comfortable and look the part.
I would still like to find an inlet that is at least close to the Omark as I do the bedding jobs for the local gun shop so have experience in this but not brave enough to get a stock un-inletted!
Colour-coded stocks - no problem! My 7mm shoots Hornady A-Max bullets, with the red tip and the stock is Black Widow laminate - black and red. My .25wssm shoots Nosler 115gr Ballistic tips with the blue plastic tip - my stock colour? - blue and black of course!
"Your mouthwash aint makin' it"
smlekid
Posts: 50
Joined: Mon Oct 11, 2010 10:39 am
Been thanked: 1 time

Post by smlekid »

I went with the electric blue
I have kinda heard the Omark is close to a Rem 700 I thouight a Savge might go close but haven't been able to check it out
Brad Y
Posts: 2181
Joined: Fri Jun 26, 2009 8:21 pm
Has thanked: 57 times
Been thanked: 142 times

Post by Brad Y »

6shooter
Posts: 44
Joined: Thu Dec 01, 2011 3:47 pm
Location: W.A.

Post by 6shooter »

Always good to see local businesses catering to the target fraternity - we are a fussy bunch!
Last edited by 6shooter on Mon Dec 10, 2012 9:50 pm, edited 1 time in total.
"Your mouthwash aint makin' it"
6shooter
Posts: 44
Joined: Thu Dec 01, 2011 3:47 pm
Location: W.A.

Post by 6shooter »

smlekid wrote:I went with the electric blue
I have kinda heard the Omark is close to a Rem 700 I thouight a Savge might go close but haven't been able to check it out


I measured the take down screw spacing on my Omark and it is 5.440" which is even shorter than a Winchester Super Short action. Remingtons are longer than this - not sure about the Savages but would imagine they are too. May have to inlet the stock myself :shock:
"Your mouthwash aint makin' it"
Brad Y
Posts: 2181
Joined: Fri Jun 26, 2009 8:21 pm
Has thanked: 57 times
Been thanked: 142 times

Post by Brad Y »

Get ahold of Brad Day at Gunstocks- he has omark stocks in his shed ready to copy. F class and target rifle style.
Post Reply Previous topicNext topic