Page 2 of 2

Re: 260ai loaders

Posted: Sun Jun 28, 2015 9:13 pm
by Dave P
williada wrote:I would be interested to read other accounts of hot 6mm's irrespective of range limits as I have a dual purpose, I like popping foxes at long range from my veranda when they are picking over bait I've laid. I can't sneak over the gullies too easily these days.

Had a 6mm cactus ie 6mm - 257Wby used to run about 70 grains AR2214 and a Berger 105.
I found that the best barrel twist was 9 1/4 so Krieger was the option.
Barrel life was around the 700 mark
Lots of fun though

Re: 260ai loaders

Posted: Mon Jun 29, 2015 11:19 pm
by BATattack
Dave P wrote:
williada wrote:I would be interested to read other accounts of hot 6mm's irrespective of range limits as I have a dual purpose, I like popping foxes at long range from my veranda when they are picking over bait I've laid. I can't sneak over the gullies too easily these days.

Had a 6mm cactus ie 6mm - 257Wby used to run about 70 grains AR2214 and a Berger 105.
I found that the best barrel twist was 9 1/4 so Krieger was the option.
Barrel life was around the 700 mark
Lots of fun though


ooooowwww that would have been a screamer! I currently have a 257 wby mag and pushing 85gr ballistic tips at 3800pfs makes it very . . . . .effective but not exactly efficient!

I'd like to replace that with a 6.5mm with a bit less performance that I can use out of a rem short action and standard bolt face.

Re: 260ai loaders

Posted: Wed Jul 01, 2015 9:20 am
by williada
Dave P, that is smokin.