Front Plate

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Post Reply Previous topicNext topic
Ras
Posts: 40
Joined: Wed Apr 04, 2018 10:15 pm
Location: NE South Aus
Has thanked: 6 times
Been thanked: 9 times

Front Plate

Post by Ras »

Not sure if its been covered before but what's the ruling on front plates that have sides on them to stop bipods slipping off it came up at a resent OPM and the RO was not sure if it was ok.

Richard
Top
Redhawk
Posts: 150
Joined: Thu Mar 16, 2017 9:24 pm
Has thanked: 473 times
Been thanked: 69 times

Re: Front Plate

Post by Redhawk »

Ras, FTR or FStandard?

A negative for FTR:
http://www.nraa.com.au/wp-content/uploa ... 7-2015.pdf
Top
Ras
Posts: 40
Joined: Wed Apr 04, 2018 10:15 pm
Location: NE South Aus
Has thanked: 6 times
Been thanked: 9 times

Re: Front Plate

Post by Ras »

They were in F Std.

Richard
Top
Malcolm Hill
Posts: 335
Joined: Fri Aug 25, 2006 9:40 pm
Location: Mid North S.A.
Has thanked: 8 times
Been thanked: 107 times

Re: Front Plate

Post by Malcolm Hill »

Hi Richard. This issue of anything on the boards or mats used under an F standard bipod that can guide the bipod in any way was dealt with and outlawed by the NRAA several years ago. Rule 20.10.1.2 part (b) covers the situation."In all cases the feet of the bipod must be free to slide freely in any direction." No grey area in that one. Regards Malcolm.
Top
Ras
Posts: 40
Joined: Wed Apr 04, 2018 10:15 pm
Location: NE South Aus
Has thanked: 6 times
Been thanked: 9 times

Re: Front Plate

Post by Ras »

Thanks Malcolm.

Richard
Top
Post Reply Previous topicNext topic

Return to “Equipment & Technical”