Page 1 of 1
Farley issue
Posted: Wed Sep 11, 2019 12:20 pm
by Tim N
Hi All
My Farley isn’t working as it should.
I’m guessing the plates are worn and need replacing?
BRT site states Farley are not in production??
I couldn’t upload the vid but what it’s doing is canting left and right as it’s moved up and down?
Any thoughts
Re: Farley issue
Posted: Wed Sep 11, 2019 12:38 pm
by ajvanwyk
I've had this issue when I still had one. It was a easy fix and I'll give you a call to see if I can help
Re: Farley issue
Posted: Wed Sep 11, 2019 5:15 pm
by Jakec27
I’ll take it off your hands if you like
Re: Farley issue
Posted: Wed Sep 11, 2019 7:10 pm
by RJNEILSEN
definitely sounds knackered. I'll give you $50 for it.
Re: Farley issue
Posted: Wed Sep 11, 2019 8:04 pm
by jasmay
Biggest problem with your Farley is you don’t have a NEO.... next
Re: Farley issue
Posted: Wed Sep 11, 2019 9:19 pm
by michaeljp
jasmay wrote:Biggest problem with your Farley is you don’t have a NEO.... next
Jasmay, i think everyone would own a SEB of some sort if there wasn't a 2 year wait.
Re: Farley issue
Posted: Wed Sep 11, 2019 10:15 pm
by Tim N
This really is the place to turn to in times of trouble.
A bit of sarcasm mixed in with some circling vultures.
With friends like these who needs enemies.
I’ll contact you soon Albert
Re: Farley issue
Posted: Thu Sep 12, 2019 6:35 pm
by Ratgun
Is there an easy fix. Having trouble adjusting mine
Re: Farley issue
Posted: Thu Sep 12, 2019 7:27 pm
by Longranger
Re: Farley issue
Posted: Fri Sep 13, 2019 9:24 pm
by Tim N
Apparently the Farley tension screws need to be set correctly so the head travels up and down level.
Some “tuning” needed
Re: Farley issue
Posted: Fri Sep 13, 2019 11:45 pm
by BATattack
Gotta have both friction screws adjusted evenly.
Re: Farley issue
Posted: Mon Sep 23, 2019 2:44 pm
by 6.5x55ai
Tim N wrote:Hi All
My Farley isn’t working as it should.
I’m guessing the plates are worn and need replacing?
BRT site states Farley are not in production??
I couldn’t upload the vid but what it’s doing is canting left and right as it’s moved up and down?
Any thoughts
A mate has just returned from the US. Whilst he was there he visited Farley and bought spares for his rest. They have all the old parts and had new rests shipping out. Very much still making rests and unfortunately still very much not answering messages.
Not answering messages is the self same same experience I had several years ago so gave up on them back then.
Re: Farley issue
Posted: Mon Sep 23, 2019 4:45 pm
by michaeljp
If its a tension screw issue, contact Butch Lambert of Shadetree rests. he sells tension screws to suit.
Re: Farley issue
Posted: Tue Sep 24, 2019 6:40 pm
by Tim N
michaeljp wrote:If its a tension screw issue, contact Butch Lambert of Shadetree rests. he sells tension screws to suit.
Thanks for the tip, I upgraded the tension feet a while ago.
I’ve adjusted the tension screws and I think it’s right...