OzFclass

Hi all,

Who can recommend what in a rear-entry style action spanner to suit Rem700 SA?

Or even better, who might have one for sale?

Cheers

Josh, BRT have rem 700 rear action tools. or the other ones which cost more are at Huntsmans https://www.huntsmanfirearms.com.au/cat ... riant=1664
https://www.brtshooterssupply.com.au/pr ... rench-rem/

Geoff

As saum2 said BRT or Hoplon precision sells them also both great guys to deal with.
https://www.hoplon.com.au/collections/a ... ion-wrench

Stuey

stu_bear2002 wrote:As saum2 said BRT or Hoplon precision sells them also both great guys to deal with.
https://www.hoplon.com.au/collections/a ... ion-wrench

Stuey

I have a PMA tool action wrench from Hoplon and they are fine (other than they are not stainless steel so need oiling). Two things to note with this style are that you need to add in the cost of a 1/2 in drive 5/8 (or 16mm) 6 sided impact socket and a 1/2 inch drive torque wrench. The torque wrench can do double duty cranking down the barrel vice nuts.

If you are swapping barrels it's a very good idea to get some anti-seize for the threads. Loctite 771 is a common option.

https://www.blackwoods.com.au/lubricant ... p/05893416

I’ve got the BRT one and it works wells.
Use Nulon L90 on the threads per smiths recommendation.