OzFclass

Hi All,
This has probably been done to death… anyway
I have been thinking about building a 6.5 of some sort and have noticed there’s not much around in the way of projectiles.
Is there an end in sight to the supply problem?

With the Ukrainian war still going and instability in the world, I assume the shortage is an ongoing issue for 2023/2024.

2 options (if our dysfunctional NRAA board can look beyond TR and their mates), with the NRAA’s approval, is:

1. Swage your own projectiles, if you can source the J4 jackets from Berger. Perrit Engineering is already making dies and presses for the bench rest community, or
2. Monolithic. However, some ranges may have an issue with solid copper projectiles.

Azzopardi wrote: Perrit Engineering is already making dies and presses for the bench rest community

Are you able to elaborate on this? supply the name of a contact person?

Pete

Gday Pete,

Talk to John Perrot. Phone no on the web site

www.perreng.com.au

Ken malgard from copperhead mite have projies so mite Gary Little and Rexem Projiectiles mite have some aswell.

Tim N wrote:Hi All,
This has probably been done to death… anyway
I have been thinking about building a 6.5 of some sort and have noticed there’s not much around in the way of projectiles.
Is there an end in sight to the supply problem?

How about ordering through Reloading International?

F Class with sling shots?

Barossa_222 wrote:F Class with sling shots?

Flymars Slingshot Rifle, might need some 50yd mounds though

RDavies wrote:

Tim N wrote:Hi All,
This has probably been done to death… anyway
I have been thinking about building a 6.5 of some sort and have noticed there’s not much around in the way of projectiles.
Is there an end in sight to the supply problem?

How about ordering through Reloading International?

I’ll have a look at this

Get yourself a good .22 and go out past 200 , put a tuner on it and dial in good ammo great practise

Azzopardi wrote:With the Ukrainian war still going and instability in the world, I assume the shortage is an ongoing issue for 2023/2024.

2 options (if our dysfunctional NRAA board can look beyond TR and their mates), with the NRAA’s approval, is:

1. Swage your own projectiles, if you can source the J4 jackets from Berger. Perrit Engineering is already making dies and presses for the bench rest community, or
2. Monolithic. However, some ranges may have an issue with solid copper projectiles.

Unfortunately jackets disappear the same way as the bullets do except just delayed by 6-12 months.

At least with sporter hunter you can be a bit more flexible about projectiles ..... They do not have to have the ultimate BC

Plus one on using Reloading International; final cost of projectiles may be high, but what are the projectiles really worth to you? I took a pessimistic view about future supply, and after failing to secure my desired projectiles in good numbers from the waiting lists of the three or four big boys in the US, I made the plunge with RI, and am now happily stocked up for foreseeable future. Of course I now occasionally have to beat my team mates off with a stick.

Maybe more people should consider shooting FTR as there a huge range of excellent projectiles to choose from

There is alot to be said for ftr. International format . flexible projectile rules ..... joypods... etc