OzFclass

Posted: **Tue Nov 18, 2008 9:37 pm**

Hi All,
This is my first post here and I would have ask in the tech forum but it appears locked to me.

I was wondering if there was any local supplier of the 6mm 115gr DTAC's?

Anyone have any experience with these in 6-284 out of a 1:8 barrel?

Regards

George

Posted: **Wed Nov 19, 2008 6:09 am**

Welcome George. I tried to get 115 DTACs through Wesfire about 12 months ago, but they said that David Tubb's company was not interested in exporting. However, I have heard of them being used in Australia. Are you aware that there are some newer DTACs e.g. 117gn boron nitride (?) coated.

Alan

Posted: **Wed Nov 19, 2008 1:23 pm**

Hi Alan,
Thanks for your reply.

I had a quick look and there is a better 6mm bullet from Tubb.

see http://www.davidtubb.com/tcom_images/dt ... s_117.html

The problem still remains of how to buy these locally.

Anyone got any of these 111gr mjpt's?

George

Posted: **Wed Nov 19, 2008 4:39 pm**

I have seen a box of 500 (115gn DTACs)sitting on the shelf at Thornton Hunting and out doors. They have been there for quite a while. Their number is 02 49661770

Posted: **Wed Nov 19, 2008 4:43 pm**

111 DTacs no longer available. Not up to scratch by Tubb standards

Posted: **Wed Nov 19, 2008 5:42 pm**

Thanks,
I'll give them a call in the morning.
George

Posted: **Thu Nov 20, 2008 6:45 pm**

Yep, they had one box of 500 moly coated ones.

Fingers crossed they will work out for me otherwise they might be going cheap.

Thanks

George