6.5x47 lapua
Posted: Mon May 06, 2013 7:58 pm
hi just wondering does some one have load data for this calibre and seating depth 28 inch maddco match barrel savage action 
Page 1 of 1
Posted: Mon May 06, 2013 8:58 pm
Do a search of this forum over the last 12-18 months
Posted: Tue May 07, 2013 11:03 pm
My Savage is currently at Maddco for a 6.5x47 conversion, and I have been doing a lot of searching for load data as well. I did a bit of a search here - there is a bit of info, but not a huge amount.
I will be using a 130gn Berger projectile, moly coated, load testing will consist of 2208 powder between 36-37.5gn and go from there - playing with seating depths etc.
I have a thread on here, which should still be on the first page, which should help you a bit.
I will be using a 130gn Berger projectile, moly coated, load testing will consist of 2208 powder between 36-37.5gn and go from there - playing with seating depths etc.
I have a thread on here, which should still be on the first page, which should help you a bit.
Posted: Wed May 08, 2013 11:17 am
I had this same thread a while ago.
PM me your email address and I will send you what data I collected off the forums.
JH
PM me your email address and I will send you what data I collected off the forums.
JH
Posted: Wed May 08, 2013 9:49 pm
130gr berger 39.5-41gr of adi 2209 .015" into the lands with a cci br4 primer and youll be on the money. 40.5gr seems to be the really sweet spot in several rifles ive seen/ owned.
also worth a try with 123gr lapuas/ sierras with around 37gr of 2208.
also worth a try with 123gr lapuas/ sierras with around 37gr of 2208.
6.5 x47
Posted: Tue May 14, 2013 10:56 am
thanks that will be a lot of help 