front rest question
Posted: Sat Aug 24, 2013 11:32 pm
How tight do you fill the front bags on your rest? If too tight can this cause problems with elevation?
Geoff
Geoff
Page 1 of 1
Posted: Sun Aug 25, 2013 12:11 am
Tight enough to fill but still able to compress with a finger slightly. Too tight your gun can bounce on it and cause vertical
Posted: Mon Sep 02, 2013 3:35 pm
Further to the original question, I use a Farley front rest and when shooting my 284 it gradually settles clockwise on the bag and usually needs adjusting during a stage.
The bag seems to be packed fairly tight.
How can I stop it ?
The bag seems to be packed fairly tight.
How can I stop it ?
Posted: Mon Sep 02, 2013 3:59 pm
Tim,
(1) Adjust the rifle every shot (I do)
(2) Offset the forend to the left. It's the kick back from recoil torque that causes what you're experiencing. That seems to be reduced if the left hand side of the stock has more to bite into.
(3) Use a lighter recoiling calibre.
John
(1) Adjust the rifle every shot (I do)
(2) Offset the forend to the left. It's the kick back from recoil torque that causes what you're experiencing. That seems to be reduced if the left hand side of the stock has more to bite into.
(3) Use a lighter recoiling calibre.
John
Posted: Mon Sep 02, 2013 10:14 pm
Thanks for the reply John,
However I was wanting to avoid the adjustment once set up.
Can the front rest bag be made with 4 separate cells to stop the settling I'm experiencing?
Not sure of the legalities.
However I was wanting to avoid the adjustment once set up.
Can the front rest bag be made with 4 separate cells to stop the settling I'm experiencing?
Not sure of the legalities.