Page 1 of 1
2209 batch speed?
Posted: Mon May 18, 2015 7:37 pm
by BATattack
Well just cracked my second 4kg of 2209 in about 5yrs (6.5x47 doesn't eat much!)
The new batch is MEM5273 and just curious whether people think it's a relatively fast or slow batch compared to others? Just wondering if I should load my normal charge or approach it with a bit of caution and do a work up with a chronograph?
Re: 2209 batch speed?
Posted: Mon May 18, 2015 8:50 pm
by RDavies
I have been using lot #5010 for the last 3-4 years or so and just switched to MEM5273. I found I had to load about .3gns less in a 284 to get the same speed, so it is marginally faster than my old lot of powder but from what I have heard is not as fast as some other recent extra fast batches.
Re: 2209 batch speed?
Posted: Mon May 18, 2015 9:45 pm
by BATattack
So it may be somewhere in the middle. My last batch was 4714 so even earlier than yours Rod!
Re: 2209 batch speed?
Posted: Tue May 19, 2015 12:09 am
by Brad Y
Im onto 5331 as my next lot but still have a few kg's of an older lot. A few people here have apparently had pierced primers with this lot. My small amount of testing in the dasher has shown its a little faster but nothing to be worried about. 0.2gr less and its probably going to be the same velocity. Cant hurt to drop a grain and work up with the aid of the chrony again mate.