OzFclass

Looking for load data for 107 SMKs in a dasher.
Thanks
CW

Warm load and it really seemed to eat the throat but I used 31.8gr 2206H, BR4 primer and a 105 hybrid. Sure you could reduce the load to 31.0gr and put in a 107 sierra and work back up slowly. But it would hammer the X.

Berger 105 vld ,powder 2209 ,32.7 gn very accurate Have shot this load out to 1000yds

Musgrave wrote:Berger 105 vld ,powder 2209 ,32.7 gn very accurate Have shot this load out to 1000yds

I cannot get the Berger's now. That's why I am trying the Sierra's.
I normally run the H4350 (2209 I think) in my dasher behind a 108 Berger. A real hammer.

If I can find more H4350 I will start working up that load, for now 32.5 gr Varget is showing STRONG!
CW

Musgrave wrote:Berger 105 vld ,powder 2209 ,32.7 gn very accurate Have shot this load out to 1000yds

Very very mild load for the dasher. Most using it run around 36gr of 2209.

What loads are folks using with 2209 in a dasher?

My dasher load for 105 hybrids is 36.4 of 2209 and a cci 450, gives around 3000 fps with crazy accuracy

it workes

105 berger vlds 2208 33.3,2209 35.5 ,2206H 31.9 touching the lands.The same with hybrids 0.008" to 0.015" off the lands
Peter