Page 1 of 1

New F-class stock from LRP on my 300WSM

Posted: Sat Apr 02, 2016 11:16 pm
by DenisA
This stock is from Matty at LRP and uses a Whidden V'block. Its has a long Kelbly 1M style fore end and a MBR style butt. The length of the stock is more apparent knowing that this is a 32" barrel.

I shot this stock prone for the first time today and the results were sensational. Vert was excellent and uses the same load that had been previously developed in a pillar/Devcon bedded stock.

Thought I'd share some photo's and a link down the bottom to a very short video illustrating how well this stock tracks when free recoiling my Savage actioned 300WSM. Despite the recoil, there's virtually no rifle torque or barrel flip. The stock is an absolute pleasure to shoot.

Image

Image

Image

Image

Image

https://youtu.be/Phbd_K0edMs

Re: New F-class LRP stock on my 300WSM

Posted: Sun Apr 03, 2016 3:57 am
by Julian D
Very nice looking set up .

Re: New F-class LRP stock on my 300WSM

Posted: Sun Apr 03, 2016 6:54 am
by AlanF
That stock looks very good. And it seems to be symmetrical L to R?

Re: New F-class LRP stock on my 300WSM

Posted: Sun Apr 03, 2016 8:42 am
by DenisA
AlanF wrote:That stock looks very good. And it seems to be symmetrical L to R?


Yes it is Alan.

Re: New F-class LRP stock on my 300WSM

Posted: Sun Apr 03, 2016 12:12 pm
by scott/r
The photos don't really do it justice either. I was having a sticky beak at it yesterday and it does look the part.

Re: New F-class stock from LRP on my 300WSM

Posted: Mon Apr 04, 2016 6:30 pm
by JasonR
Very nice set up, where did you get the adjustable plate under the rear bag??

Cheers Jason

Re: New F-class stock from LRP on my 300WSM

Posted: Mon Apr 04, 2016 6:33 pm
by DenisA
JasonR wrote:Very nice set up, where did you get the adjustable plate under the rear bag??

Cheers Jason


The rear plate isn't adjustable Jason. It has 50mm spikes and spacers to float the plate a little above the spongy grass. There are a couple of extra spacers on the rear spikes to account for the mound angles.

Re: New F-class stock from LRP on my 300WSM

Posted: Mon Apr 04, 2016 8:59 pm
by JasonR
Hi Denis, looks like a very effective way to elevate and support the rear bag. Did you make it yourself?

Cheers Jason

Re: New F-class stock from LRP on my 300WSM

Posted: Mon Apr 04, 2016 9:36 pm
by DenisA
JasonR wrote:Hi Denis, looks like a very effective way to elevate and support the rear bag. Did you make it yourself?

Cheers Jason


This particular one was made by a mate, club member and forum member Dave B.

Re: New F-class stock from LRP on my 300WSM

Posted: Mon Apr 04, 2016 10:14 pm
by Send-it
very nice indeed. :D

Re: New F-class stock from LRP on my 300WSM

Posted: Tue Apr 05, 2016 6:26 pm
by S.S NO FEAR
Hi Denis.Andrew said to have a look at the new stock .very very nice :D . are you using all of your savage stocks .still want to build a 223 rifle for junior .bring the 300wsm to bundy prize shoot
cheers steve.

Re: New F-class stock from LRP on my 300WSM

Posted: Tue Apr 05, 2016 10:17 pm
by DenisA
Thanks for your comments gents. Matt's done a superb job with this stock. Its far better than my previous stocks and will be a positive influence on my game.

Steve, I'm really looking forward to Bundy.