OzFclass

hello , I have bought some copperhead 112 vld to try in my 243 with a 1 in 8 twist and the barrel is 28 inches long , I have ar2213sc powder , cci br2 primers , federal cases .but no info , has anyone tried these ? , I have tried other copperheads projectiles with good results , but want to give the 112 a good chance , don't want to waste them , any help would be great .

Barry
Some loads below but using 115 bullets and H4831 same as ADI AR2213-SC, this will give a starting load but l would try and seat 0.010" to 0.015" into the lands reduce the below loads by 5% as you are seating the land so l would start at 42.5 grains with AR2213-SC


H4831 – 44.5 gr. – BR2 – S115 – jump 0.015” – 3011 – 28 – 10 -- 0.982
H4831 – 45.0 gr. – BR2 – S115 – jump 0.015” – 3036 – 15 – 06 -- 0.251
H4831 – 45.5 gr. – BR2 – S115 – jump 0.015” – 3049 – 20 – 10 -- 0.766
Cheers
Ken
Copperhead Bullets

Barry, My info is similar to Ken's but with an XC case and using 115gn projectile. My max load is 44.5 using AR2213sc this gets me around 3000fps. So Ken's recommendation to start at 42.5 is good.
Geoff

Hello Ken and Geoff, thank you for your great info , now I can go back to my shed and start to reload them for this weekend .
keep making those copper heads projectiles Ken .