OzFclass

Hello,
Looking for some load data for a 6.5x47. Im using 2208 and 142 smk out of a 30in barrel.
Any help would be appreciated. Thanks

Sorry, no load info for 142 SMKs. Personally never thought that was the realm for my 6.5x47. I have a 6.5AI as well so can drive the 140s/142s fast in that.
For my 6.5x47 with 31" barrel I initially used 123 gr Scenars and 38.0 gr of 2208 which gave me stunning accuracy and goodish velocity. I dropped this projectile/combination though as it offered no great advantage over my 6mmBR. I settled on the 130 gr Berger VLD which still gives superb accuracy and reasonable velocity for the case. Initial powder was 2209 (41.5 gr IIRC) and final powder choice Reloder 15.

Thanks, Im starting to think the same about the 140s from what i read. the reamer was made for 140s i was told but not sure what difference that makes.

Yeah my barrel was specifically set up for 123 gr Scenars but all good with the 130 Bergers.

For the best velocity with heavy for caliber bullets in that cal your best bet will probably be 2209. Otherwise 37.5 2208 and 130 bergers is a fairly common load but work up as per usual.

Just checked back thru my loading notes and my load of 41.5 gr of 2209 with 130 gr Berger VLDs was using a looooong droptube and even then was mildly compressed. Swapped to RL15 but didn't try 2208. Something I will try at some stage as Alliant powder is not the easiest to source. Extremely low ES with RL15 but almost certainly more temperature sensitive than ADI.

140gn projectiles are being used successfully in the 6.5x47 quite commonly. Its just a matter of waiting for more people to post.

Put < 6.5x47L with 140gr class > in the search box.
You should come up with a discussion on this starting with the date July 25th, 2014.
This will give you some answers that should help you.

On the PC and off the IPad so can give you the link here.

viewtopic.php?f=5&t=6053&hilit=6.5x47L+with+140gr+class