Page 1 of 1

223 which barrel 1:7T or 1:8T

Posted: Mon Feb 12, 2007 7:48 am
by Ned
Hi everyone
I would like to know which barrel is best suited for shooting 80grn HPBT.
Has any body done any testing with these barrel twists, if so what were your resaults in FPS and what loads were used.

Thanks Ned

Posted: Mon Feb 12, 2007 6:46 pm
by jcinsa
Ned,
We use a 28 inch 1 in 8 twist barrel with 80 gn sierras, and as long as they leave the muzzle @ 2950 fps they are stable out to 1000 m.
We load 24+ grains of 2206H, but you would have to work a load up with your own rifle to be sure it's safe. We don't get very long case life.
Regards John

Posted: Mon Feb 12, 2007 8:51 pm
by Chopper
stick with the 8 twist it will do the job very well as i have shot 6.5, 7.7 ,and 8 twist barrels at a 1000 and no differance was evident.

223 which barrel 1:7T or 1:8T

Posted: Thu Feb 15, 2007 7:50 pm
by Ned
Thanks for the input,much welcomed.
I did some testing at my local club, with a chrony last week and managed
2965 FPS, with MAB.223 barel, Lapua Match .223 cases, 25.0grn 2206H.
and 7 1/2 remington primers. I think and hope this load will get be to 1,000 yds.

Any more info on this subject is most welcomed.

All the best, and good grouping.


Peter Kelly

Posted: Thu Feb 15, 2007 11:48 pm
by Chopper
2206h mmm tell me more as seasons go by 2206 has been good.

Posted: Thu Feb 15, 2007 11:52 pm
by Chopper
2930fps has been good to at 1000.