284 load for Lapua 284 brass, Berger 180vld

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Message
Author
GlennA
Posts: 33
Joined: Fri Jan 22, 2021 7:54 pm
Location: Nth Balgowlah, NSW

284 load for Lapua 284 brass, Berger 180vld

#1 Postby GlennA » Wed Jul 28, 2021 4:57 pm

Hi guys, I’m new to fopen. Getting a new 284 built with Barnard action, 32” 8.5twist Bartlein using the new Lapua 284 brass and Berger 180 vld’s. Suggestions for powder type, amount of powder, seating depths much appreciated.
There’s a reason for everything!

willow
Posts: 567
Joined: Sat Aug 15, 2015 9:51 pm

Re: 284 load for Lapua 284 brass, Berger 180vld

#2 Postby willow » Wed Jul 28, 2021 7:42 pm

Most popular powder choice for this combo is 2209. No reports locally on how the new Lapua brass stacks up, but I'd be looking to start around 49.5gr and work up slowly. Seating depth? VLDs generally like to be jammed, but they will also work jumped - start in the lands to begin with.

GlennA
Posts: 33
Joined: Fri Jan 22, 2021 7:54 pm
Location: Nth Balgowlah, NSW

Re: 284 load for Lapua 284 brass, Berger 180vld

#3 Postby GlennA » Wed Jul 28, 2021 9:00 pm

What primers would you use with the 2209 powder?
There’s a reason for everything!

GlennA
Posts: 33
Joined: Fri Jan 22, 2021 7:54 pm
Location: Nth Balgowlah, NSW

Re: 284 load for Lapua 284 brass, Berger 180vld

#4 Postby GlennA » Thu Jul 29, 2021 9:35 am

willow wrote:Most popular powder choice for this combo is 2209. No reports locally on how the new Lapua brass stacks up, but I'd be looking to start around 49.5gr and work up slowly. Seating depth? VLDs generally like to be jammed, but they will also work jumped - start in the lands to begin with.

What primers would you use?
There’s a reason for everything!

BRETT B
Posts: 270
Joined: Fri Sep 30, 2005 2:37 pm
Location: PERTH

Re: 284 load for Lapua 284 brass, Berger 180vld

#5 Postby BRETT B » Thu Jul 29, 2021 10:57 am

GlennA wrote:
willow wrote:Most popular powder choice for this combo is 2209. No reports locally on how the new Lapua brass stacks up, but I'd be looking to start around 49.5gr and work up slowly. Seating depth? VLDs generally like to be jammed, but they will also work jumped - start in the lands to begin with.

What primers would you use?

The 2 Primers most popular would be,
Federal 210 GOLD MATCH
CCI BR2
Highly recommend using a chrono while working up your load in 284.
Keep speed below 2820fps with 180VLD
BRETT BUNYAN F CLASS OPEN SHOOTER W.A.

Cliff Austen
Posts: 173
Joined: Wed Jul 06, 2005 11:18 am
Location: Sydney NSW Australia

Re: 284 load for Lapua 284 brass, Berger 180vld

#6 Postby Cliff Austen » Thu Jul 29, 2021 12:04 pm

Using 6.5 x 284 Lapua brass necked up
CCI BR2 Primers
32 inch Benchmark barrel 8.5 twist
180 grain Berger Hybrids
10 thou jump
52.5 grains of 2213SC. a slower burn and less aggressive on the barrel. If you are using 2209 then 50 grains +/- a bit.
Expect about 2300 rounds down the barrel, on the average, for barrel life.
The best I shot with this was 60.10 at 500m at the Vic Queens. It also shoots well at 1200 yards.
Remember, start low with powder load and work up, as every barrel has its own personality.
Good Luck
Cheers
Cliff

willow
Posts: 567
Joined: Sat Aug 15, 2015 9:51 pm

Re: 284 load for Lapua 284 brass, Berger 180vld

#7 Postby willow » Thu Jul 29, 2021 8:46 pm

GlennA wrote:
willow wrote:Most popular powder choice for this combo is 2209. No reports locally on how the new Lapua brass stacks up, but I'd be looking to start around 49.5gr and work up slowly. Seating depth? VLDs generally like to be jammed, but they will also work jumped - start in the lands to begin with.

What primers would you use?


What Brett said, he's one of the best F-Open shooters in the country and knows the 284 well.

GlennA
Posts: 33
Joined: Fri Jan 22, 2021 7:54 pm
Location: Nth Balgowlah, NSW

Re: 284 load for Lapua 284 brass, Berger 180vld

#8 Postby GlennA » Tue Aug 03, 2021 10:56 pm

Cliff Austen wrote:Using 6.5 x 284 Lapua brass necked up
CCI BR2 Primers
32 inch Benchmark barrel 8.5 twist
180 grain Berger Hybrids
10 thou jump
52.5 grains of 2213SC. a slower burn and less aggressive on the barrel. If you are using 2209 then 50 grains +/- a bit.
Expect about 2300 rounds down the barrel, on the average, for barrel life.
The best I shot with this was 60.10 at 500m at the Vic Queens. It also shoots well at 1200 yards.
Remember, start low with powder load and work up, as every barrel has its own personality.
Good Luck
Cheers
Cliff


Cliff, what velocity did you get with that load?
There’s a reason for everything!

Cliff Austen
Posts: 173
Joined: Wed Jul 06, 2005 11:18 am
Location: Sydney NSW Australia

Re: 284 load for Lapua 284 brass, Berger 180vld

#9 Postby Cliff Austen » Wed Aug 04, 2021 10:48 am

Velocity is 2773 fps
cheers
cliff


Return to “Equipment & Technical”

Who is online

Users browsing this forum: No registered users and 36 guests