Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Message
Author
cheech
Posts: 384
Joined: Wed Jul 15, 2009 11:10 pm

Re: Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

#16 Postby cheech » Fri Jul 05, 2019 8:46 am

BATattack wrote:All the flash "upgrades" and still running bronze bushes instead of bearings and a O ring drive belt instead of bearings and a timing belt.


Yep I’ve had 2 broken belts in under 2 years , although very cheap to replace , the belt drive slips and struggles with ADI powders for some reason and I regularly dry brush moly powder on the tube at the bronze bushes for lube , overall best powder dispensing system to date

UL1700
Posts: 424
Joined: Sat Sep 16, 2017 5:39 pm

Re: Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

#17 Postby UL1700 » Wed Jul 10, 2019 9:57 am

Well the V3 upgrade is on my desk so hopefully I can let you all know how it goes soon!!

Image2019-07-10_09-43-28 by James Elphick, on Flickr

UL1700
Posts: 424
Joined: Sat Sep 16, 2017 5:39 pm

Re: Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

#18 Postby UL1700 » Wed Jul 10, 2019 6:24 pm

Image2019-07-10_06-20-37 by James Elphick, on Flickr

Well it looks good! In fact it looks very good! Simple to use and does exactly what it should top Marks to Adam!

agro
Posts: 339
Joined: Fri Jul 22, 2005 9:29 pm
Location: Regional Vic.

Re: Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

#19 Postby agro » Wed Jul 10, 2019 7:13 pm

PeteFox wrote:I’ve had mine 3 weeks and Adam MacDonald comes up with this, bugger

https://www.autotrickler.com/autotrickler.html

New Trickler base, completely new powder measure and you can dial the weight up on your phone.

Pete

How long did it take to ship??

UL1700
Posts: 424
Joined: Sat Sep 16, 2017 5:39 pm

Re: Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

#20 Postby UL1700 » Wed Jul 10, 2019 7:18 pm

agro wrote:How long did it take to ship??


I was on shipment number 1 or 2 and this was the emailed delivery schedule (sent on the 25th of June)

For orders starting May 23 @ 11:30pm
before May 24 @ 1:00 am, ship June 28
before May 24 @ 10:45 am, ship July 3
before May 24 @ 4:23 pm, ship July 10
before May 26 @ 3:41 pm, ship July 17
before May 31 @ 9:47 am, ship July 24
before June 7 @ 8:19 pm, ship July 31
before June 18 @ 5:00 pm, ship August 7
for new orders today, estimate August 14

Trevor Rhodes
Posts: 226
Joined: Mon Feb 03, 2014 8:31 pm
Location: Woodbrook Vic.

Re: Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

#21 Postby Trevor Rhodes » Wed Jul 10, 2019 8:21 pm

I'm a bit greedy, got the update from V2 to V3 and seeing l had another A&D 300i l have ordered a complete new V3 for it. Very happy with the auto trickler setup.

Hugo
Posts: 4
Joined: Sun Jul 07, 2019 12:52 am

Re: Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

#22 Postby Hugo » Sun Jul 14, 2019 6:52 pm

I still waiting for mine to arrive, I bought my A&D scale in Oz so it came with the 243 power supply adapter.
Adam reckons you need the higher power one that usually ships with a scale from the US, or get his electronics modified so it works with an external PSU.
I was wondering if someone here has it working with the Oz 243 adapter without problems or not.
Cheers

Trevor Rhodes
Posts: 226
Joined: Mon Feb 03, 2014 8:31 pm
Location: Woodbrook Vic.

Re: Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

#23 Postby Trevor Rhodes » Sun Jul 14, 2019 7:53 pm

The power cable on the A&D scale is thin and light. Adam when sends you the setup includes a heavier power lead ( to handle extra voltage to run the trickler and thrower as well as the scales) that just needs a conversion from Canadian to Australian 3 pi plug.

UL1700
Posts: 424
Joined: Sat Sep 16, 2017 5:39 pm

Re: Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

#24 Postby UL1700 » Sun Jul 14, 2019 8:12 pm

It's just a cheap 2A 12 volt supply, the only thing to watch is that the centre is negative and the outer is positive unlike almost any other equipment!

Trevor Rhodes
Posts: 226
Joined: Mon Feb 03, 2014 8:31 pm
Location: Woodbrook Vic.

Re: Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

#25 Postby Trevor Rhodes » Mon Jul 15, 2019 11:00 am

BATattack wrote:All the flash "upgrades" and still running bronze bushes instead of bearings and a O ring drive belt instead of bearings and a timing belt.

The V3 model has a timing belt on the thrower and Oring on the trickler which allows you without much effort to spin the orgar by hand to drop another kernel or two.

Hugo
Posts: 4
Joined: Sun Jul 07, 2019 12:52 am

Re: Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

#26 Postby Hugo » Fri Jul 19, 2019 12:33 am

UL1700 wrote:It's just a cheap 2A 12 volt supply, the only thing to watch is that the centre is negative and the outer is positive unlike almost any other equipment!

Thanks, I didn't measure polarity yet on the original PSU but thanks for the tip.
I might have overlooked that in my excitement when the autotrickler finally arrives hehehe.
I probably have a 2 or 3 amp PSU lying around and will solder the right connector on it before the auto trickle arrives.
I already have the area 419 kit in and bought the scale at the scale shop in Perth.

Can't wait....

Hugo
Posts: 4
Joined: Sun Jul 07, 2019 12:52 am

Re: Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

#27 Postby Hugo » Mon Sep 16, 2019 2:47 pm

Finally received the V3 from Adam, it actually came with an 2amp psu, unfortunately with a USA plug but it was easy to bend the contacts 45 degrees with a plier so it would fit here in Oz.fine tuning was done quickly and it works as advertised. drops a charge within 10 seconds.99% of the time within + or - 0.02 GN or 1 kernel of 2209. probably after some more finetuning this could be improved.I highly recommend this unit.only took 5 days to get here after receiving shipping confirmation.

Brad Y
Posts: 2181
Joined: Fri Jun 26, 2009 8:21 pm

Re: Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

#28 Postby Brad Y » Mon Sep 16, 2019 11:04 pm

Hugo i just hope its not rated for 120V like USA!

UL1700
Posts: 424
Joined: Sat Sep 16, 2017 5:39 pm

Re: Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

#29 Postby UL1700 » Tue Sep 17, 2019 10:20 am

Brad Y wrote:Hugo i just hope its not rated for 120V like USA!


They work from 100 to 240 as do almost all modern switching power supplies.

pjifl
Posts: 883
Joined: Fri Jun 17, 2005 12:15 pm
Location: Innisfail, Far North QLD.

Re: Auto Trickler upgrade, prepare to kick yourself if you’ve just bought one

#30 Postby pjifl » Tue Sep 17, 2019 1:41 pm

I have used a lot of O rings and always had some on hand or left over so used them in my own projects with varied success. Some types of O rings last well, others are a disaster. Under any tension most develop micro cracks early and then break. Depends on the material and how long they have been on the shelf. They usually last longer as belts if they are taken off when not in use.

One disadvantage of O rings for belts is that they are usually too elastic and the revs surge under load.

Peter Smith.


Return to “Equipment & Technical”

Who is online

Users browsing this forum: No registered users and 42 guests