Quickload Data

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Message
Author
Rogue22
Posts: 104
Joined: Sun Dec 20, 2020 8:53 pm

Quickload Data

#1 Postby Rogue22 » Mon Mar 15, 2021 7:21 pm

Hi All,

Wondering if anyone could run a load on quickload for me? I’m looking to see what pressure my current load is running at. I don’t have any pressure signs currently, just interested to know.

If there is I’ll put details up.

Thanks in advance

RDavies
Posts: 2322
Joined: Sun Feb 12, 2006 7:23 pm
Location: Singleton NSW

Re: Quickload Data

#2 Postby RDavies » Tue Mar 16, 2021 5:11 pm

Yes, I have it. Details I will need are.
Cartridge (and if possible water capacity of a fired case , with primer in, filled up to the top)
Barrel length (from bolt face to muzzle
OAL of loaded round.
Amount of jam or jump.
Bullet
Powder and charge weight.
(are you using small flash hole Palma brass)
Current velocity.
Moly, or bare bullets.

Rogue22
Posts: 104
Joined: Sun Dec 20, 2020 8:53 pm

Re: Quickload Data

#3 Postby Rogue22 » Tue Mar 16, 2021 8:54 pm

Thanks for your help mate, details are as per below;

Case - .308 win, lapua Palma SR primer brass

Case capacity - 56.14 gn water filled to the brim

Barrel length - 26” measured to bolt face

OAL length of round - 2.9477 (average of 5 rounds measured)

Jump - 0.059

Bullet - Berger 185gn juggernaut target

Powder - AR2208, 44.5gn

Bare bullets

I’m not seeing any pressure signs and load is not a crush load. Just interested to know how close to max pressure I am.

Cheers

Rogue22
Posts: 104
Joined: Sun Dec 20, 2020 8:53 pm

Re: Quickload Data

#4 Postby Rogue22 » Tue Mar 16, 2021 11:08 pm

Sorry mate I forgot my current velocity, average 2712 fps measured with labradar during load development

Thanks

RDavies
Posts: 2322
Joined: Sun Feb 12, 2006 7:23 pm
Location: Singleton NSW

Re: Quickload Data

#5 Postby RDavies » Wed Mar 17, 2021 8:07 am

Going by your data, you will be running somewhere around 63400psi.

Rogue22
Posts: 104
Joined: Sun Dec 20, 2020 8:53 pm

Re: Quickload Data

#6 Postby Rogue22 » Wed Mar 17, 2021 10:29 am

Very interesting, SAAMI max pressure is listed at 62,000 psi. So 1400 psi over pressure.

Don’t think I’ll try and push this one any further.

Thanks for you help mate.

RDavies
Posts: 2322
Joined: Sun Feb 12, 2006 7:23 pm
Location: Singleton NSW

Re: Quickload Data

#7 Postby RDavies » Wed Mar 17, 2021 9:00 pm

Rogue22 wrote:Very interesting, SAAMI max pressure is listed at 62,000 psi. So 1400 psi over pressure.

Don’t think I’ll try and push this one any further.

Thanks for you help mate.

It is up there but should be fine.
I would be too scared to put some F/tr shooters loads into Quickload

Julian D
Posts: 224
Joined: Fri Dec 05, 2014 4:42 am
Location: Mackay

Re: Quickload Data

#8 Postby Julian D » Thu Mar 18, 2021 4:34 am

:roll: :roll: :roll:

ShaneG
Posts: 574
Joined: Fri Jun 15, 2012 2:25 pm
Location: Cairns

Re: Quickload Data

#9 Postby ShaneG » Thu Mar 18, 2021 6:06 pm

RDavies wrote:
Rogue22 wrote:Very interesting, SAAMI max pressure is listed at 62,000 psi. So 1400 psi over pressure.

Don’t think I’ll try and push this one any further.

Thanks for you help mate.

It is up there but should be fine.
I would be too scared to put some F/tr shooters loads into Quickload


Barnards handle amazing pressure Rod!
The yanks can’t believe our loads especially Chewie or Mr Barlow!


Return to “Equipment & Technical”

Who is online

Users browsing this forum: No registered users and 96 guests