F-Class Standard 'Shooters and Equipment'

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Message
Author
Tony Q
Posts: 1044
Joined: Mon Jun 20, 2005 8:04 pm
Location: Adelaide (MBRC)

F-Class Standard 'Shooters and Equipment'

#1 Postby Tony Q » Wed Jun 29, 2005 4:56 pm

Please indicate if you are a std shooter or indeed both std and open class.

If you like you can also list the equipment you use so we can see who is using factory rifles and who is using TR rifles.

Indicate also if you are using a Harris Bi pod, F Class Bi pod or Rest.

Just for interest :)

Thank you.
Last edited by Tony Q on Thu Jun 30, 2005 7:43 pm, edited 3 times in total.
MBRC F-Class standard ... and proud of it!

Tony Q
Posts: 1044
Joined: Mon Jun 20, 2005 8:04 pm
Location: Adelaide (MBRC)

#2 Postby Tony Q » Wed Jun 29, 2005 5:01 pm

Sako TRG-22 .308 cal

Sako TRG action
Sako Match barrel - 26 inch 1 in 11 twist.
Match 2 stage trigger
Sako TRG Bi pod (sometimes F-Class bi pod)

Nightforce NXS 5.5 -22x56 mill dot
Sako rings

Lapua Brass
ADI 2208
Fedral match primers
Sierra 155gn MK
Last edited by Tony Q on Thu Jun 30, 2005 1:08 pm, edited 3 times in total.
MBRC F-Class standard ... and proud of it!

Mel Q
Posts: 15
Joined: Thu Jun 23, 2005 9:16 pm
Location: Adelaide (MBRC)

#3 Postby Mel Q » Wed Jun 29, 2005 5:05 pm

Remington 700 action .308 cal
Madco barrel - 1 in 12 twist (palma chamber) - 26 inch
AI stock
Harris bi pod (canting)

Nightforce NXS 3.5-15 x 56 mill dot

Lapua Brass
ADI 2208
Federal match primers
155gn Sierra MK
Last edited by Mel Q on Thu Jun 30, 2005 1:08 pm, edited 2 times in total.

Simon C
Posts: 422
Joined: Wed Jun 22, 2005 9:43 pm
Location: Adelaide

#4 Postby Simon C » Wed Jun 29, 2005 8:34 pm

Remington 700 action .308 cal created by Lightforce
28" Maddco barrel (palma chamber)
HS precision stock
Nightforce NXS 5.5-22x50 MLR
Harris bi pod (canting)


Lapua Brass
Federal Primer
AR2208 44.5gns for 2885fps (much to Tony's disgust :cry: )
"Aim small, miss small"

Simon

Simon C
Posts: 422
Joined: Wed Jun 22, 2005 9:43 pm
Location: Adelaide

#5 Postby Simon C » Wed Jun 29, 2005 8:35 pm

......and F-Class Std (much to Tony's disgust :cry: )
"Aim small, miss small"



Simon

S.Scheske
Posts: 69
Joined: Fri Jun 24, 2005 11:58 pm
Location: Tasmania
Contact:

#6 Postby S.Scheske » Thu Jun 30, 2005 1:14 am

Mel Q wrote:Remington 700 action .308 cal
Madco barrel - 1 in 12 twist (palma chamber) - 26 inch
AI stock
Harris bi pod (canting)

Nightforce NXS 3.5-15 x 56 mill dot

Lapua Brass
ADI 2208 - 45.5gn's
Federal match primers
155gn Sierra MK


Same as Above but with NightForce NXS 5.5-22x56 MillDot
Sam Scheske
CTRC
2004 ADFC Rifle Team

Chris Burdett
Posts: 113
Joined: Sun Jun 19, 2005 6:34 pm
Location: NSW Australia

#7 Postby Chris Burdett » Fri Jul 01, 2005 1:41 pm

My TR/F (Standard)Rifle Is
PRA Quadlock,29" Border Bl,
. 16xLynx, Mastin TR stock with a plate in the rail.
Lapua cases, BJD,s, AR 2206H, GM210M, Pro-Cal front rest.
Usued to use 80mm Bi-pod, now use rest. Anyone wanna buy the Bi-pod?
Chris :lol:
Chris B.

B.Scheske
Posts: 23
Joined: Sat Jun 25, 2005 4:36 pm
Location: Victor Harbor South Australia
Contact:

#8 Postby B.Scheske » Sat Jul 02, 2005 2:17 pm

Factory Remington 700, action, barrel etc
Harris Bi-pod

Scope was a Millett 6-25*56

Lapua Brass
ADI 2208 - 46.5gn's
Federal Match Gold primers and CCI Benchrest
155 Sierra MK
"Make The First Shot Count!"


Brett

RAVEN
Posts: 1978
Joined: Sun Jun 19, 2005 9:37 pm
Location: Adelaide South Australia (CTV)

#9 Postby RAVEN » Mon Jul 04, 2005 12:20 am


S.Scheske
Posts: 69
Joined: Fri Jun 24, 2005 11:58 pm
Location: Tasmania
Contact:

#10 Postby S.Scheske » Tue Jul 05, 2005 1:36 am

Will be putting in a order for a DSR-1 around Xmas Time :lol: just dont know what cal i wanna get it in....... Standed or do i Cross to the dark side :twisted: ( Fclass Open ) or do i forget about Fclass...and get a .338 :shock: to many Cal's to choose from :roll:
Sam Scheske
CTRC
2004 ADFC Rifle Team

GM
Posts: 54
Joined: Thu Jul 07, 2005 4:39 pm
Location: nsw

#11 Postby GM » Thu Jul 07, 2005 5:06 pm

F Standard rifle is an Omark 44 308 with a NF 8-32x56 Np-R2 shot of a rest.
F-Open rifle is a KHGS Barnard Action 6mm BR with a 30 inch Trueflite with NF 8-32x56 mildot(to be replaced with a np-2dd when finances allow),mostly shot off a rest but sometimes an f-class bi pod.

My young fellow shoots both classes with a 223 Rem police with either a NF or Leupold 8.5-25 LR fine duplex off a rest.
GM
don't let the bastards grind you down

mitchellchandler_au
Posts: 166
Joined: Sun Apr 02, 2006 8:29 pm
Location: MIA

#12 Postby mitchellchandler_au » Wed Apr 12, 2006 5:00 pm

Remigton Police rifle
standard varmint barrel 26 inch 1:12 twist
HS stock
Harris bipod

Leupold 10x40 M4 with milldot retical

remington cases
winchester primers
2208 powder
46.5gn.dyer projectiles
Firepower usally means an increased number of misses per minute. 50 misses are not firepower. One hit is firepower

Vic Police Rifle Club
Posts: 23
Joined: Fri Sep 23, 2005 1:38 pm
Location: Werribee Rifle Range

#13 Postby Vic Police Rifle Club » Wed Apr 12, 2006 6:34 pm

Nesika 6mmbr

Nesika K Action with Jewell BR trigger
Maddco No 7 profile 26" 1-8 twist barrel with .271 "No Turn" neck
ProCal MBR laminated stock

Leupold Comp fixed 35X45 BR 30mm scope fine cross hairs with dot.
Leupold Mk4 rings
ProCal 1913 MilStd 20 MOA rail

Lapua Brass
Lapua 105 Scenar projectiles
CCI BR4 primers
32.5 gns 2208 powder. Thats right.. 32.5 (No excess pressure signs)

Hart front rest / Edgewood rear bag.
& the thing shoots better than I ever will !!!! :D

RDavies
Posts: 2323
Joined: Sun Feb 12, 2006 7:23 pm
Location: Singleton NSW

#14 Postby RDavies » Wed Apr 12, 2006 8:24 pm

Both.
Rem 700VS 308 with 12" twist 26" Tobler barrel ,Obermeyer chamber.6-24x bushnell 4200 scope.,Burris offset rings on benchrest. for standard

Stohle Panda switch barrel ,Phil Mastin F class stock, jewel trigger/rings 22BR, 22XBR, 22/6mm imp ,a few other short range calibers and soon to be 284. on 3" bench rest.
Last edited by RDavies on Fri Apr 14, 2006 8:07 am, edited 1 time in total.

Chris Burdett
Posts: 113
Joined: Sun Jun 19, 2005 6:34 pm
Location: NSW Australia

#15 Postby Chris Burdett » Wed Apr 12, 2006 9:55 pm

gees, lets hope that you guys don,t get too serious about this TR/F shooting :shock: :lol:
Chris B.


Return to “Equipment & Technical”

Who is online

Users browsing this forum: No registered users and 48 guests