Lee Collet Neck Die

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Message
Author
scott/r
Posts: 885
Joined: Wed Aug 27, 2014 8:22 pm
Location: far north brisbane

Re: Lee Collet Neck Die

#31 Postby scott/r » Mon Jan 08, 2018 9:22 pm

Ah, yeh, sorry four grooves.
Last edited by scott/r on Fri Jan 12, 2018 5:53 pm, edited 1 time in total.

Normmatzen
Posts: 33
Joined: Mon Dec 20, 2010 4:35 pm
Location: California

Re: Lee Collet Neck Die

#32 Postby Normmatzen » Fri Jan 12, 2018 9:15 am

I also use LEE collet dies exclusively.

If you are leaving die marks on the necks, you are using WAY too much pressure. Go to P 1 and re-read ALL of scott/r's re-print of John Valentine's article on how to use and set up a LEE collet die.
Norm

Wal86
Posts: 319
Joined: Sun Nov 20, 2016 5:10 pm

Re: Lee Collet Neck Die

#33 Postby Wal86 » Fri Jan 12, 2018 6:32 pm

Hey fellas,

Just out of curiosity, what sort of neck run out are you achieveing using Lee Collet dies?
Then after bullet seating, what is your projectile run out?
Cheers

johnk
Posts: 2211
Joined: Sun Sep 07, 2008 7:55 pm
Location: Brisbane

Re: Lee Collet Neck Die

#34 Postby johnk » Fri Jan 12, 2018 6:54 pm

Never found a runout tool worth a damn.

Gyro
Posts: 764
Joined: Sat Jun 10, 2017 2:44 pm
Location: New Zealand

Re: Lee Collet Neck Die

#35 Postby Gyro » Fri Jan 12, 2018 7:02 pm

Wal86, if your reloading dies are straight/true ( via good gear being set up properly ) then I'd ask how on earth could there be any runout ?

That's always been the question for me regarding runout. I do notice some very dodgy measuring tools available to check for a problem that to me should not be there in the first place.

Wal86
Posts: 319
Joined: Sun Nov 20, 2016 5:10 pm

Re: Lee Collet Neck Die

#36 Postby Wal86 » Fri Jan 12, 2018 7:11 pm

johnk wrote:Never found a runout tool worth a damn.


Doug Veal in South Australia makes a very good spinner, not sure if his still making them..


Anyway still would like to know what neck run out is achieved by Lee collet dies? Then after your projectile is seated?
There has been a few comments about straight ammo achieved using these dies.

Cheers

Longranger
Posts: 254
Joined: Sat Mar 02, 2013 9:49 pm
Location: Queensland

Re: Lee Collet Neck Die

#37 Postby Longranger » Fri Jan 12, 2018 7:58 pm

Wal86 wrote:Hey fellas,

Just out of curiosity, what sort of neck run out are you achieveing using Lee Collet dies?
Then after bullet seating, what is your projectile run out?
Cheers


Generally under 0.001" total indicated runout. That translates to 0.0005" actual. Rarely exceeds 0.002" T.I.R.

argh
Posts: 167
Joined: Wed Sep 04, 2013 4:25 pm
Location: Sydney

Re: Lee Collet Neck Die

#38 Postby argh » Fri Jan 12, 2018 8:15 pm

Wal86 wrote:Hey fellas,

Just out of curiosity, what sort of neck run out are you achieveing using Lee Collet dies?
Then after bullet seating, what is your projectile run out?
Cheers


Cant check runnout on the case as the "grooves" show a jump, but after seating with a forster BR seater, I typically get half the rounds with zero runnout, another 40% with up to .001, and the rest at 10
% or less with .001 to .003.

The Lee collet die works, it just works based on a simple non complicated design. Remember that all that glitters is not always gold, and conversely, just because the Lee Die doesn't cost a fortune, and densest have an expensive brand name attached doesnt mean its not gold, or wont size brass consistently and accurately.

Cheers
Adrian

Wal86
Posts: 319
Joined: Sun Nov 20, 2016 5:10 pm

Re: Lee Collet Neck Die

#39 Postby Wal86 » Fri Jan 12, 2018 8:27 pm

Thanks for the information fellas, much appreciated..

Cheers


Return to “Equipment & Technical”

Who is online

Users browsing this forum: No registered users and 42 guests