Which action?

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Message
Author
Jagumba
Posts: 83
Joined: Sun Jul 10, 2005 6:27 am
Location: Canberra

Which action?

#1 Postby Jagumba » Sun Jul 31, 2005 9:01 am

I am thinking of having another rifle built for F Class and 500m Fly shoots. I have an Omark action and also a Winchester Model 70 Magnum action spare. I was thinking a 6.5/284 on the Omark or a 7mm Rem Mag or 300 Win Mag on the Winchester. Which one guys?

Cheers
Matt

AlanF
Posts: 7495
Joined: Wed Jun 15, 2005 8:22 pm
Location: Maffra, Vic

#2 Postby AlanF » Sun Jul 31, 2005 10:13 am

Matt,

Sorry I'm not actually addressing your question, but why are you considering the 7mm Rem and 300 Win magnums. I ask that because (a) they are both belted (which can be problematic) and (b) both high in recoil. Are you intending to build it to any weight limits?

Alan :-k

a.JR
Posts: 205
Joined: Sat Jul 09, 2005 8:33 am
Location: AUST

ED

#3 Postby a.JR » Sun Jul 31, 2005 11:42 am

ED
Last edited by a.JR on Sun Jan 01, 2006 4:54 pm, edited 2 times in total.

RAVEN
Posts: 1978
Joined: Sun Jun 19, 2005 9:37 pm
Location: Adelaide South Australia (CTV)

#4 Postby RAVEN » Sun Jul 31, 2005 7:22 pm

Hi Matt have you considered some or the 6mm rounds 6BR, 6mm Dasher, 6mm XC I have read somewhere that D. Tubb is using 2217 with the 115Gr 6mm bullets and getting good results
Low recoil good barrel life less powder :idea:
Cheers
RB

Jagumba
Posts: 83
Joined: Sun Jul 10, 2005 6:27 am
Location: Canberra

#5 Postby Jagumba » Mon Aug 01, 2005 7:25 am

Raven

I already have a 6BR but was wanting something with a little more projectile diameter (particularly for the 500m Fly event), hence the 7mm / 30 cal selection. Rest assured it will be appropriately weighted for the recoil side of things!

Cheers
Matt

RAVEN
Posts: 1978
Joined: Sun Jun 19, 2005 9:37 pm
Location: Adelaide South Australia (CTV)

#6 Postby RAVEN » Tue Aug 02, 2005 12:22 am

Hi Matt i actually shoot a 7mm rem mag in 500 fly the rifle weight is 17lbs and recoil is managable with 175Gr and 180 projys
using 2217 my velocities are around 2800fps and this is not max and only shot out of standard chamber but accuacy is reasonable.
Cheers
RICHARD :)

Shane
Posts: 12
Joined: Mon Jul 04, 2005 9:13 am
Location: Narrandera
Contact:

#7 Postby Shane » Wed Aug 03, 2005 9:01 am

Matt,
The 6.5 would be the way to go, on the omark. But have it built by someone who knows how to true actions well as both actions will need a bit of work, or a lot. If you go for a belted case there is no major problems just get good cases and batch them out. Go the 300 win mag and get lapua cases and go from there. I have built quiet a few 6.5 284's for fly shooting and they are a great calibre, so is the 300 win mag but if you go for one of these bigger cases make the rifle heavy class around the 30-40 pound mark, it makes them a dream to use. This however will rule you out of f class with weight so that would make the 6.5 more appealing. One last thing have a good think about selling both your actions for finance and get a custom action for your rig. eg viper, panda, bat,neiska.
regards,
Shane

Jagumba
Posts: 83
Joined: Sun Jul 10, 2005 6:27 am
Location: Canberra

#8 Postby Jagumba » Fri Aug 05, 2005 6:56 am

Shane-

Those comments sound fair enough to me. I am going to advertise the Winchester and build a 6.5 on the Omark...

Cheers
Matt

AlanF
Posts: 7495
Joined: Wed Jun 15, 2005 8:22 pm
Location: Maffra, Vic

#9 Postby AlanF » Fri Aug 05, 2005 12:25 pm

Matt,

While I did question your going to 7mm Mag or .300 Mag in F-Class, that wasn't necessarily saying you shouldn't go above 6.5mm. If you're more concerned about 1000 yd performance, then the straight .284 Win is a definite contender, esp. since the availability of the 175grSMK. Recoil is acceptable if you have a good stock and rest setup, barrel life is theoretically better, and because of the higher BC, performance at the long longs will be at least as good as 6.5mm.

I know of one Omark in this calibre. If you are interested it would be worth sending a PM to a.JR (Jeff Rogers) - he's had experience with .284 Win, and as you may already know, is a very accomplished rifle builder and load developer.

Alan :)


Return to “Equipment & Technical”

Who is online

Users browsing this forum: No registered users and 31 guests