HBC 155.5

If you shoot full-bore, then you're welcome to use this forum to discuss your sport.

Moderator: Mod

Message
Author
Barry Davies
Posts: 1383
Joined: Tue Aug 24, 2010 12:11 pm

Re: HBC 155.5

#16 Postby Barry Davies » Mon Dec 24, 2018 9:34 am

The HBC is of excellent quality. Having loaded many 1000's I found less that 1.5 thou variation in dimensions that matter with around 0.5 gn variation in weight, which is of little or no consequence.
There is some ( up to 10 thou ) variation in ogive to base dimension from batch to batch, but again of little consequence and heaps better that Berger which I have measures at 55 thou variation base to ogive batch to batch ( a real PITA )
I have shot these HBC's in 3 groove 14 twist barrels and they give excellent results at least up to 600 yards. I Have not shot them beyond this distance in the 14 twist barrels )
Have shot both pointed and unpointed -- no difference. My personal preference is for unpointed.
Only wish that David would produce a tangent ogive 155 grainer -- would'nt have to buy from overseas then.

Mick_762
Posts: 235
Joined: Mon Sep 29, 2014 3:00 pm
Location: Darwin (again)

Re: HBC 155.5

#17 Postby Mick_762 » Mon Dec 24, 2018 9:58 am

Happy to be corrected, however as I said there is a fair bit of anecdotal evidence (that no, I havent bothered collating due to it being anecdotal) that points to QC being marginal at times.

Oh and yes, I still use the Dyer HBC its reasonably priced and Aussie made.
David Mickel
Darwin Rifle Club

Barry Davies
Posts: 1383
Joined: Tue Aug 24, 2010 12:11 pm

Re: HBC 155.5

#18 Postby Barry Davies » Mon Dec 24, 2018 12:52 pm

Anecdotal evidence is not worth the paper it's not written on and requires taking with a grain of salt.
If I had to fault any aspect of the HBC it would be the Base to ogive dimension, which to my way of thinking is a little too long, resulting in a more than necessary amount of the projectile within the case thereby restricting case capacity. Now, that is with a chamber to say B150 dimensions. This can be overcome by using a longer throated chamber like an M852, But that creates a problem if a change is made to say a Berger 155.5 which can have a base to ogive measurement of up to 80 thou less than the HBC. resulting in about 65 thou of parallel locating in the case neck. OK but barely.

bainp
Posts: 117
Joined: Fri Jul 15, 2005 6:05 pm
Location: Wagga Wagga, Australia

Re: HBC 155.5

#19 Postby bainp » Tue Dec 25, 2018 8:23 am

Barry can I pick your brains a little? Do you shoot the HBC bullets into or off the lands for best results?
regards - Philip

Barry Davies
Posts: 1383
Joined: Tue Aug 24, 2010 12:11 pm

Re: HBC 155.5

#20 Postby Barry Davies » Tue Dec 25, 2018 10:16 am

G'day Phil.
15 thou off in one rifle 10 thou off in another.
Barry

bainp
Posts: 117
Joined: Fri Jul 15, 2005 6:05 pm
Location: Wagga Wagga, Australia

Re: HBC 155.5

#21 Postby bainp » Wed Dec 26, 2018 6:19 am

Thanks for the help Barry - Philip


Return to “Full-bore/Target Rifle”

Who is online

Users browsing this forum: No registered users and 20 guests