Equipment & Technical

Moderator: Mod

New Topic

3165 topics

Page 1 of 64
- Jump to page:
1
2
3
4
5
…
64
Next

Topics

Replies

Views

Last post

Telescopic Sight Poll

Last post by Trevor Rhodes « Tue Mar 19, 2024 12:04 pm
Replies: 18
1

2
This topic has a poll. by AlanF » Sat Aug 06, 2022 6:57 pm
Rating: 1.66%
First post

There has been a request to run a poll on telescopic sights. This is mainly for the benefit of shooters who are looking at purchasing a scope. You're...

Last post

I started using Ziess scopes, great optics but only 24 power and the turrets are in quarters, l had a lot of success with them and l had a nf...
18 Replies

34928 Views

Last post by Trevor Rhodes View the latest post
Tue Mar 19, 2024 12:04 pm
F-Open Calibre Poll - Long Range

Last post by Fire Dog « Mon Dec 11, 2023 4:14 pm
Replies: 20
1

2
This topic has a poll. by AlanF » Thu Jun 25, 2015 10:34 am
Rating: 1.32%
First post

Note there are 3 polls. This one is for long ranges (over 600 yards). So if you must choose two different calibres to use at a Queens shoot, what...

Last post

Up to 600yds it is the mighty 6BR for me and past that I have finally conceded the need for a 7mm unless conditions are good...
That said, I have...
20 Replies

78157 Views

Last post by Fire Dog View the latest post
Mon Dec 11, 2023 4:14 pm
F-Open Calibre Poll - All Round

Last post by CBH Australia « Wed Oct 19, 2022 9:10 pm
Replies: 7
This topic has a poll. by AlanF » Thu Jun 25, 2015 10:39 am
Rating: 0.99%
First post

Note there are 3 polls. This one is for all ranges from 300 to 1000yds. So if you must use a single calibre throughout a Queens shoot, what would you...

Last post

Old thread but how do people rate the 7-08ai?
I like my 7-08 Tikka CTR shooting pests from the car

7 Replies

58247 Views

Last post by CBH Australia View the latest post
Wed Oct 19, 2022 9:10 pm
F-Open Calibre Poll - Short Range

Last post by Bigtravoz « Mon Sep 04, 2017 7:12 pm
Replies: 13
This topic has a poll. by AlanF » Thu Jun 25, 2015 10:30 am
Rating: 0.66%
First post

Note there are 3 polls. This one is for short ranges (up to 600 yards). So if you must choose two different calibres to use at a Queens shoot, what...

Last post

243 should be fine also for short range.

13 Replies

45621 Views

Last post by Bigtravoz View the latest post
Mon Sep 04, 2017 7:12 pm
FTR Barrel free bore

Last post by wsftr « Fri Sep 20, 2024 2:54 pm
Replies: 6
by Peterla » Tue Sep 17, 2024 1:02 pm

First post

Hi all
What the freebore most of you use in a FTR setup to chamber Berger 180 to 200 projectiles
180 jugs and 200.20x are the 2 main projectiles that...

Last post

Throat diameter is slightly larger based on experimentation being done in LR BR, Fopen and PRC in respect to more
consistent velocities with slightly...

6 Replies

603 Views

Last post by wsftr View the latest post
Fri Sep 20, 2024 2:54 pm
6.5 Creedmoor 30" Barrel 140gr Berger 2209 Velocity

Last post by ECKY « Fri Sep 20, 2024 9:41 am
Replies: 2
by ECKY » Sat Sep 07, 2024 9:20 am

First post

Does anyone know what sort of velocity you can expect from a 6.5 creedmoor with a 30" barrel running 140gr Berger Hybrids with 2209. Lapua srp...

Last post

Thanks for the information. Will wind her up a bit.

2 Replies

1228 Views

Last post by ECKY View the latest post
Fri Sep 20, 2024 9:41 am
7 FCP. Before I pull the trigger on this......literally

Last post by KHGS « Fri Sep 20, 2024 7:05 am
Replies: 6
by PeteFox » Wed Sep 18, 2024 12:46 pm
Rating: 2.65%
First post

This project has been on the go for a long time and is a bit of a saga, including at one stage the action disappeared in transit, reamers became...

Last post

I agree with Matt 100%, any other method is hit and miss at best.
Keith H.

6 Replies

567 Views

Last post by KHGS View the latest post
Fri Sep 20, 2024 7:05 am
Longest barrel on an Impact Precision 737R?

Last post by Rich4 « Thu Sep 19, 2024 4:56 pm
Replies: 4
by GuyLuke » Wed Sep 18, 2024 4:42 pm
Rating: 1.99%
First post

What would be the longest barrel you could put on an Impact Precision 737R action?

I've got a 6.5mm 31" heavy varmint profile Bartlein coming...

Last post

Also try fitting the scope and finding the balance point,
Bed to there if it’s not running down the taper to much.

4 Replies

416 Views

Last post by Rich4 View the latest post
Thu Sep 19, 2024 4:56 pm
180 vs 184 Berger

Last post by Clyde « Tue Sep 17, 2024 10:02 pm
Replies: 3
by Clyde » Mon Sep 16, 2024 4:08 pm

First post

How many fps do you lose when going from a 180 to a 184 Berger using the same load?

Last post

Suspicion confirmed. Thank you

3 Replies

583 Views

Last post by Clyde View the latest post
Tue Sep 17, 2024 10:02 pm
Testing White River and OFV primers

Last post by saltpan « Mon Sep 16, 2024 8:47 am
Replies: 2
by John Weigel » Mon Apr 22, 2024 7:16 pm
Rating: 3.64%
First post

OK, straight up – this skinny data-set raises as may questions as it answers. But I figured it was worth sharing its rough-and-ready indications...

Last post

So I used the OFV primers for the first time on Saturday - I didn't weigh them. I had quite a large vertical spread - although I was shooting 800m at...

2 Replies

4467 Views

Last post by saltpan View the latest post
Mon Sep 16, 2024 8:47 am
Berger bullets in NSW

Last post by dazza284 « Fri Sep 13, 2024 1:22 am
Replies: 6
by esh2chan » Wed Sep 11, 2024 2:26 pm
Rating: 0.33%
First post

Since BRT closed, how are you NSW residents sourcing Berger bullets?

Last post

Yep and even after the Aussie nut case went viral in NZ they can still import projectiles cases and mags without all the shit we put up with state to...

6 Replies

2024 Views

Last post by dazza284 View the latest post
Fri Sep 13, 2024 1:22 am
Coping with tinnitus

Last post by superx10 « Wed Sep 11, 2024 7:06 am
Replies: 9
by superx10 » Sat Sep 07, 2024 8:05 am
Rating: 3.97%
First post

Hi

Like many of our readers I have been shooting for a long time and subject to loud noises, this has resulted in a severe case of tinnitus. A...

Last post

Great advice majaci thanks.

9 Replies

2221 Views

Last post by superx10 View the latest post
Wed Sep 11, 2024 7:06 am
Dyer HBC or Optimus HBC

Last post by Rich4 « Tue Sep 10, 2024 3:59 pm
Replies: 7
by Ken Melgaard » Wed Aug 28, 2024 1:38 pm
Rating: 0.99%
First post

Just looking for some info on the Dyer or Optimus HBC bullets if anyone has some they could measure for me please
The info that l am wanting, is the...

Last post

I believe it was all pretty worn out, last time I spoke to them it was being refurbished in the states then nothing. :cry:

7 Replies

3576 Views

Last post by Rich4 View the latest post
Tue Sep 10, 2024 3:59 pm
Supertrickler vs AutoTrickler v4 people opinions after a few years of use?

Last post by charlieboy « Tue Sep 10, 2024 11:10 am
Replies: 6
by F Class Ric » Mon Aug 12, 2024 12:20 pm
Rating: 1.66%
First post

Hey fellow F Class shooters.

So after upgrading all my equipment of late I am still left using mechanical powder thrower and 0.02gn scales and a...

Last post

I run a ST its the older version and is build # 400 aprox. I am running the latest software, which has been a major advance, its not unusual to get...

6 Replies

2877 Views

Last post by charlieboy View the latest post
Tue Sep 10, 2024 11:10 am
Scope leveling

Last post by majaci@bigpond.com « Tue Sep 03, 2024 6:14 pm
Replies: 9
by Tim L » Sat Aug 24, 2024 11:44 am
Rating: 1.32%
First post

What level of accuracy is actually necessary, and how do we get it?

There are a few systems out there, but I am always left thinking there are a few...

Last post

Vertical line test, done once for the lifetime of that scope with bubble fitted and never removed again

9 Replies

3830 Views

Last post by majaci@bigpond.com View the latest post
Tue Sep 03, 2024 6:14 pm
Replacement FP springs for Kelbly F-Class action

Last post by BATattack « Fri Aug 23, 2024 9:50 am
Replies: 1
by wsftr » Thu Aug 22, 2024 3:52 pm
Rating: 0.33%
First post

Hi,
I'm having trouble getting hold of quality replacement FP springs for Kelbly F-Class action.
Has anyone been down this track that can offer any...

Last post

Ziersch custom rifles. Send them and email of what you want and if they don't have it in stock they will put it in their next kelbly order.

I had a...

1 Replies

2197 Views

Last post by BATattack View the latest post
Fri Aug 23, 2024 9:50 am
7MM/6.8WESTERN

Last post by John T « Thu Aug 22, 2024 6:30 pm
Replies: 4
by John T » Tue Jul 02, 2024 8:00 pm
Rating: 0.33%
First post

Hello.
This topic may have been discussed previously, but has anyone developed and tested a 7mm wildcat of the 6.8 Western? (Rod, I will not believe...

Last post

Hello Frank.
I forgot that the 6.5 PRC is based on the 300 RCM. That case has very thin walls. This results in a powder chamber capacity which is...

4 Replies

3404 Views

Last post by John T View the latest post
Thu Aug 22, 2024 6:30 pm
Small Rifle primers

Last post by Weairy « Thu Aug 22, 2024 1:54 pm
Replies: 9
by Ras » Tue Aug 20, 2024 3:56 pm
Rating: 0.33%
First post

After having problems getting my normal Small Rifle Primers (CCI 400) I have managed getting some Remington No7 1/2 and some No 6 1/2 primers which...

Last post

Yep, I run a .223 with 80.5gn Bergers at 2988fps, with the Rem 7 1/2 or CCI BR4s for reference.

9 Replies

3182 Views

Last post by Weairy View the latest post
Thu Aug 22, 2024 1:54 pm
SFP or FFP?

Last post by macguru « Tue Aug 20, 2024 2:57 pm
Replies: 4
by drewdavis » Thu Aug 15, 2024 1:32 pm
Rating: 0.66%
First post

Hi everyone. I'm setting up my first long range rifle and might want to try shooting an Fclass one day. From what I've read and what I feel works for...

Last post

SFP

The reticle stays the same size, the notches mean different things at different mags, but if you are shooting a known target like we do thats...

4 Replies

2871 Views

Last post by macguru View the latest post
Tue Aug 20, 2024 2:57 pm
SAKO .308W Cases

Last post by 6.5x55 « Fri Aug 16, 2024 2:04 pm
Replies: 3
by Walt » Mon Jul 29, 2024 12:51 pm
Rating: 0.66%
First post

Can anyone tell me the actual, real case length of new, unprimed SAKO .308W cases, straight out of the pack? I am aware the specs say 2.015 inches...

Last post

Sako new unfired case length is 50.89mm - 50.95mm or 2.0035in- 2.0045in, 10 cases measured with a mitutoyo.

3 Replies

2989 Views

Last post by 6.5x55 View the latest post
Fri Aug 16, 2024 2:04 pm
Importing Dima stocks?

Last post by cheech « Sun Aug 11, 2024 6:59 pm
Replies: 15
1

2
by BATattack » Tue Mar 05, 2024 6:00 am
Rating: 1.66%
First post

Has anyone imported a Dima stock recently? If so what was the process? PM me if you prefer.

Last post

I think was back in 2016 I purchased M1 Kelbly stock directly from Kelblys no police forms required I rang customs in Port Adelaide (and emailed )...
15 Replies

7284 Views

Last post by cheech View the latest post
Sun Aug 11, 2024 6:59 pm
Berger 200H .308 30" Barrel SRP Brass 2680 fps - is it too hot?

Last post by wsftr « Fri Aug 09, 2024 6:44 am
Replies: 4
by wsftr » Wed Aug 07, 2024 9:44 am
Rating: 1.32%
First post

Hi,
would an avg of 2670 - 2680 fps in a 30" Krieger Lapua SRP brass be pushing too much pressure?
Load looks nice but would it be too hard on...

Last post

Thanks - I'm using 2208, so nothing unusual there. Barrel is a Krieger .300/.308 10 tw so I don't expect that to create anything unusual pressure...

4 Replies

2956 Views

Last post by wsftr View the latest post
Fri Aug 09, 2024 6:44 am
The deeper the rabbit hole, the...

Last post by tom1 « Thu Aug 01, 2024 3:29 pm
Replies: 13
by John Weigel » Tue Jul 30, 2024 1:27 pm
Rating: 5.63%
First post

Just a couple of small observations around brass prep that recently surprised me - and may be of interest to one or two others. Firstly, after...

Last post

Thanks for your advice Keith, much appreciated.
Cheers Brad.

13 Replies

3986 Views

Last post by tom1 View the latest post
Thu Aug 01, 2024 3:29 pm
Powder Choice.

Last post by MarkS « Tue Jul 30, 2024 5:23 pm
Replies: 1
by Rwa198 » Tue Jul 30, 2024 11:12 am

First post

Looking for the best powder for the following-

.223 Rem
24" Varmint Barrel
1:8" twist
ADI Case
Berger 80.5 Gn Fullbore target projectile...

Last post

First up, for those heavies get a 1-7 twist barrel.
With 80.5/85.5/88s both 2208 and 2206H work well.
Just use what you have/can get and what...

1 Replies

2807 Views

Last post by MarkS View the latest post
Tue Jul 30, 2024 5:23 pm
7w/6.5 load

Last post by Frank Green « Tue Jul 30, 2024 4:38 am
Replies: 32
1

2

3
by heritage5 » Tue Jan 09, 2024 5:36 pm
Rating: 11.59%
First post

Hi all I have a necked up 6.5 prc to 7mm trying to get 180 hybrid target to shoot I am at 60.5 of 2217 2950 fps but am struggling to get them to...

Last post

So I got the test data for the 190 ATIP's and the H4831sc load with 57.5gr.

Avg. velocity was 2900fps, SD = 8, ES = 25

Average pressure was 69,284!...
32 Replies

14348 Views

Last post by Frank Green View the latest post
Tue Jul 30, 2024 4:38 am
CCI BR4 Primers

Last post by Chopper « Tue Jul 23, 2024 2:24 pm
Replies: 22
1

2
by loneranger » Sun Jun 19, 2022 8:14 pm
Rating: 0.33%
First post

Has anyone been having issues with BR4 Primers ?
I have been experiencing more and more primers failing to fire from the same batch of primers. At...

Last post

Sorry CCI 450 Magnum Are the primers.
22 Replies

10900 Views

Last post by Chopper View the latest post
Tue Jul 23, 2024 2:24 pm
Barnard bolt handle

Last post by richmac « Fri Jul 19, 2024 10:19 am
Replies: 1
by haemish762 » Thu Jul 18, 2024 9:51 pm

First post

Hi all, could anyone tell me the thread for the Barnard P bolt handles that screw into the bolt body.

Last post

Hi Haemish
Barnard Bolt thread 3/8 24 TPI UNF

1 Replies

2971 Views

Last post by richmac View the latest post
Fri Jul 19, 2024 10:19 am
Tri May Actions - Barnard Replacement?

Last post by eico « Mon Jul 15, 2024 6:04 pm
Replies: 7
by PeteFox » Mon Jun 17, 2024 9:42 am
Rating: 1.32%
First post

Some of you wouldn't have seen this, so I'm reposting here, found on facebook .
Seems like it's a drop in replacement for a Barnard. would be...

Last post

Thank you for the details provided. Cheers

7 Replies

4902 Views

Last post by eico View the latest post
Mon Jul 15, 2024 6:04 pm
223 Advice.

Last post by tom1 « Sun Jul 14, 2024 11:48 pm
Replies: 6
by tom1 » Mon Jul 08, 2024 10:17 am
Rating: 2.32%
First post

We have a young bloke that is interested in coming down to our range to use his 223 in Sporter Class. It has a 21 inch barrel & I in 12 twist. He...

Last post

This morning our club shot at 300 yards. The young bloke showed up & we set him up for Sporter Class. First application he scored 38.1. He was...

6 Replies

3624 Views

Last post by tom1 View the latest post
Sun Jul 14, 2024 11:48 pm
Autodod question

Last post by jasmay « Fri Jul 12, 2024 10:09 pm
Replies: 1
by Rogue22 » Fri Jul 12, 2024 8:38 pm
Rating: 0.66%
First post

I’m looking to start neck turning my cases for FTR, even with Lapua cases and running an undersize mandrel I seem to get 2 distinctly different...

Last post

Send me a PM mate…. Interested in helping.

1 Replies

3036 Views

Last post by jasmay View the latest post
Fri Jul 12, 2024 10:09 pm
Sierra 2156 load infor

Last post by Blindbat « Tue Jul 09, 2024 1:10 am
Replies: 2
by theoldfart » Mon Jul 08, 2024 10:36 pm
Rating: 1.99%
First post

Hi, relatively new to this forum and after over 30 years away from Target Rifle shooting, I have decided to have a crack at either FTR or F...

Last post

A word of warning about brass. Winchester cases are less uniform and have thinner walls than Lapua. Consequently they will have lower pressures with...

2 Replies

3070 Views

Last post by Blindbat View the latest post
Tue Jul 09, 2024 1:10 am
7 SAUM Brass Prep

Last post by JezL « Thu Jul 04, 2024 3:28 pm
Replies: 6
by AngryDropbear » Thu Jul 04, 2024 1:35 pm
Rating: 0.66%
First post

Gday Guys,

Just got my Norma Brass for a new 7 saum brass. Intend to build a dummy round for the gunsmith to calculate free bore. Was thinking about...

Last post

No worries! Happy to help.

Also dont take my preference for Chamber Clearance ... Everyone has there own preference with clearance.
For the 7mm's...

6 Replies

3521 Views

Last post by JezL View the latest post
Thu Jul 04, 2024 3:28 pm
Quickload help FOUND thank you

Last post by saum2 « Sun Jun 30, 2024 11:10 am

by saum2 » Sun Jun 30, 2024 11:10 am

Anyone with Quickload software able to assist with a project that's not going too well.

0 Replies

2773 Views

Last post by saum2 View the latest post
Sun Jun 30, 2024 11:10 am
6 Dasher Brass Question

Last post by Blindbat « Fri Jun 28, 2024 6:22 pm
Replies: 6
by Blindbat » Tue May 07, 2024 12:15 pm
Rating: 1.99%
First post

Everything I have read about producing 6 Dasher brass involves starting with 6br cases and hydroforming, creating a false shoulder or the hillbilly...

Last post

I'd like to thank everyone for their advice. I have broken open more than one piggy bank and bought some Alpha brass. The thing I like about Lapua...

6 Replies

4229 Views

Last post by Blindbat View the latest post
Fri Jun 28, 2024 6:22 pm
Lee Collet Die Small Decapping Pin

Last post by tom1 « Thu Jun 20, 2024 3:32 pm
Replies: 6
by tom1 » Thu Apr 18, 2024 10:51 am
Rating: 1.66%
First post

Okay, I've just sold one kidney to buy some 308 Palma brass. I normally use a small base die & a Lee Collet die to prepare my 308 ADI or...

Last post

I ended up getting another Lee collet die. I put the mandrel in a drill & carefully filed the pin down, then tidied up with wet & dry. Works...

6 Replies

4675 Views

Last post by tom1 View the latest post
Thu Jun 20, 2024 3:32 pm
Neck tension (continued) and other considerations

Last post by wsftr « Wed Jun 19, 2024 6:47 am
Replies: 3
by John Weigel » Tue Jun 18, 2024 1:26 pm
Rating: 1.32%
First post

After the recent discussion about neck-lubes and neck tension issues, I decided to check my earlier conclusion that it doesn't make a lot of...

Last post

Its interesting as Erik C states that neck tension doesn't matter it just needs to be consistent. He consequently only makes two mandrel sizes.
So...

3 Replies

3684 Views

Last post by wsftr View the latest post
Wed Jun 19, 2024 6:47 am
Neck seating lubrication advice

Last post by PeteFox « Tue Jun 18, 2024 1:20 pm
Replies: 17
1

2
by fclassNrugby » Fri Jun 14, 2024 7:42 am
Rating: 8.94%
First post

Hi All,

I am concerned that my neck tensions are not consistent and interested in finding ways to improve. I use a Redding collar neck sizing die...

Last post

Yes, and the problem is attributing an improvement or it's opposite to one factor, when it might be something else entirely.
The rabbit hole
17 Replies

6009 Views

Last post by PeteFox View the latest post
Tue Jun 18, 2024 1:20 pm
Proof Research Stainless barrels

Last post by Mick_762 « Sat Jun 15, 2024 1:59 pm
Replies: 3
by Mick_762 » Mon May 20, 2024 7:37 am
Rating: 0.66%
First post

Is there any knowledge on the Proof barrels?

I have been offered a 30” 1:7.5 6mm SS (non carbon wrapped) Med Palma profile - for a reasonable price....

Last post

Thanks mate, sorry for the delay in reply.

3 Replies

3831 Views

Last post by Mick_762 View the latest post
Sat Jun 15, 2024 1:59 pm
Sierra 2156 variants

Last post by tom1 « Mon Jun 10, 2024 9:05 pm
Replies: 7
by majaci@bigpond.com » Fri Jun 07, 2024 7:08 pm
Rating: 0.66%
First post

Does anyone know for sure what is the difference between 2156, 2156B and 2156C?
Some say designation B and C are 'bulk' and 'carton' and some believe...

Last post

That's reassuring Geoff. Unfortunately I doubt if quality projectiles or lower grade projectiles would make a great deal of difference to my scores...

7 Replies

4441 Views

Last post by tom1 View the latest post
Mon Jun 10, 2024 9:05 pm
Myths and Mysticism in Load Development

Last post by Drop shot « Fri Jun 07, 2024 6:36 am
Replies: 201
1

…

10

11

12

13

14
by DingoDeerHunter » Thu Jun 15, 2023 1:55 pm
Rating: 86.09%
First post

A mob called "Blackburn Defense" has started a YT channel delving into the issue of what testing can show results between performance of...

Last post

The tune window is the big one, but it's linked to OBT. The mass is doing 99% of the work. The micrometer adjustment of the tuner is probably more...
201 Replies

84400 Views

Last post by Drop shot View the latest post
Fri Jun 07, 2024 6:36 am
Case Prep Station

Last post by Rich4 « Wed Jun 05, 2024 8:19 pm
Replies: 2
by Mark De » Tue Jun 04, 2024 12:02 pm
Rating: 0.66%
First post

Hi Chaps.
I am after a case preparation station.
I am open to recommendations.

Last post

Another vote for the RCBS, I got mine on special though,
I’d really like the hornady cast iron case prep centre or the Frankfort arsenal case prep,...

2 Replies

3901 Views

Last post by Rich4 View the latest post
Wed Jun 05, 2024 8:19 pm
Alliant/Reloader powder

Last post by superx10 « Sun Jun 02, 2024 4:41 am
Replies: 9
by Frank Green » Fri May 31, 2024 2:06 am
Rating: 1.66%
First post

Just a fyi for you all.

I don't know what the availability is of Alliant/Reloader series of powder is by you all or how much you use it but this is...

Last post

Here is a link to a gun store that has a fair bit of powder in stock.

9 Replies

5702 Views

Last post by superx10 View the latest post
Sun Jun 02, 2024 4:41 am
March Majesta reticle question

Last post by Dan81 « Sun May 26, 2024 6:13 pm
Replies: 1
by John Weigel » Mon May 20, 2024 1:02 pm

First post

Does anyone have experience with the MTR - WFD reticle - designed for 1000 yd F-Class in March Magesta scope? It has the circle at approx super ring,...

Last post

John,

When I looked at this option I found all the videos and write ups on it were when its on 80X power,
Ive never shot above 50X power So when I...

1 Replies

3651 Views

Last post by Dan81 View the latest post
Sun May 26, 2024 6:13 pm
Wilson Die Question

Last post by superx10 « Wed May 22, 2024 1:35 pm
Replies: 8
by superx10 » Wed May 22, 2024 11:50 am
Rating: 0.66%
First post

Hi am full length sizing some 6.5 Peterson Brass after mandriling up from 6.5 to 7mm with a .309 bush i am using a foster press and a wilson die and...

Last post

Hi Thanks for your help but I have just worked out the problem .......I hade removed the decapping pin and found out the black knurled nut not only...

8 Replies

4371 Views

Last post by superx10 View the latest post
Wed May 22, 2024 1:35 pm
Large Rifle Primer avail...

Last post by Blade « Mon May 20, 2024 7:22 pm

by Blade » Mon May 20, 2024 7:22 pm
Rating: 0.33%

Picked up 5,000 Ginex LRP's at the VRA store Saturday morning.. Seems they have some left.. Ran my first load through and seem to be on point.....

0 Replies

3499 Views

Last post by Blade View the latest post
Mon May 20, 2024 7:22 pm
Moly Coating

Last post by ned kelly « Wed May 15, 2024 9:22 am
Replies: 11
by crunchy » Wed Apr 24, 2024 7:51 am
Rating: 5.96%
First post

Are shooters still moly, WS2 and HBN coating their bullets
For FOpen.
What are the pros and cons in this age , have seen posts that are years old
But...

Last post

G'day Bat,
I moly'd 75Amax's and they were fine. I used a gemstone tumbler and the rpm was low. Accuracy was spot on at 600yds
Cheerio Geoff

11 Replies

5934 Views

Last post by ned kelly View the latest post
Wed May 15, 2024 9:22 am
WTB Throw lever for NF competion

Last post by Tim L « Sun May 12, 2024 9:34 pm
Replies: 3
by superx10 » Sun Mar 03, 2024 1:17 pm

First post

As the title says does anyone know of any aftermarket makers of a throw lever for the very popular Nightforce competition to make it easier to change...

Last post

Prototype
Testing at NQ King's

20240512_213053.jpg

3 Replies

5033 Views

Last post by Tim L View the latest post
Sun May 12, 2024 9:34 pm
MCIS scoring

Last post by superx10 « Wed May 01, 2024 8:34 pm
Replies: 4
by superx10 » Wed May 01, 2024 9:10 am

First post

Can anyone explain how the mcis maths work for interclub shoots were Fst Ftr and open are given a differnt factor to work out the finished group...

Last post

Hi It seems to be hard on FTR and easy FSD I should look at it a bit closer

4 Replies

4121 Views

Last post by superx10 View the latest post
Wed May 01, 2024 8:34 pm
Wet weather plotting

Last post by Daveh « Mon Apr 22, 2024 11:19 pm
Replies: 2
by Daveh » Mon Apr 22, 2024 8:17 pm
Rating: 0.99%
First post

Can anyone let me know where I can purchase a rain cover/clipboard to keep plot sheets dry if it rains while shooting.
I'm not sure what they are...

Last post

Thanks very much..Ordered already.
Dave

2 Replies

3900 Views

Last post by Daveh View the latest post
Mon Apr 22, 2024 11:19 pm
Shooting Berger 185 Hybrids with a FB of .250 or more

Last post by wsftr « Mon Apr 22, 2024 9:27 am

by wsftr » Mon Apr 22, 2024 9:27 am

Does anyone have any experience with shooting Berger 185 Hybrids with a lot of jump?
I want to use Hornardy 200ELDs and Berger 185 Hybrids in the...

0 Replies

3600 Views

Last post by wsftr View the latest post
Mon Apr 22, 2024 9:27 am

New Topic

3165 topics

Page 1 of 64
- Jump to page:
1
2
3
4
5
…
64
Next

Return to Board Index

Who is online

Users browsing this forum: 6.5x55ai, Gaffy, Google [Bot] and 10 guests

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum