Has anyone had experience with any of the hydraulic type of recoil dampeners? Owing to a shoulder problem I am looking for something to reduce felt recoil on it. From what I have read they seem to work, but I would like to hear of first hand experiences before I fork out the dollars, as they are not cheap.
Thanks,
Trevor.
R.A.D. systems
Moderator: Mod
-
- Posts: 568
- Joined: Sat Aug 15, 2015 9:51 pm
Re: R.A.D. systems
I have 3 F-Open rifles and they all have RAD systems on them. I went with one based on advice when I chambered up a 300wsm - it made a noticeable difference in felt recoil - there's definitely less 'sting' felt on your shoulder and I had no issue using the 300wsm over a 2-3 three day shoot. My current calibres which have RADs on them are a 6GT, which really isn't necessary but it just so happens I ordered my McMillan Kestros ZR with one, and I no longer use the 300wsm due to energy limit changes at Malabar. The other two are 284 Shehane and 7-6.5 PRC-KW - recoil under both are very easy to manage and enjoyable to shoot.
The RADs are not cheap but I feel well worth it - I have two new stocks coming to life over the next couple of months and both will have RADs fitted.
The RADs are not cheap but I feel well worth it - I have two new stocks coming to life over the next couple of months and both will have RADs fitted.
-
- Posts: 289
- Joined: Sat Sep 12, 2015 2:07 pm
Re: R.A.D. systems
Hi Willow,
Where did you get your R.A.D. systems from? One I looked at from U.S.A. said could not be exported. Can get one from the U.K. Would prefer to buy in Australia if possible.
Cheers,
Trevor.
Where did you get your R.A.D. systems from? One I looked at from U.S.A. said could not be exported. Can get one from the U.K. Would prefer to buy in Australia if possible.
Cheers,
Trevor.
-
- Posts: 1337
- Joined: Fri Jan 25, 2013 8:18 pm
- Location: Branxton NSW
Re: R.A.D. systems
Re chamber to 6BR
We don't rise to the level of our expectations, we fall to the level of our training. Archilochos 680-645 BC
-
- Posts: 123
- Joined: Tue Feb 28, 2017 12:03 pm
Re: R.A.D. systems
I spoke with Matt P / LRP this afternoon about these actually, and placed an order with him for one.
He usually orders a few at a time. Perhaps speak with him directly
He usually orders a few at a time. Perhaps speak with him directly
Regards,
Jez
Jez
-
- Posts: 568
- Joined: Sat Aug 15, 2015 9:51 pm
Re: R.A.D. systems
Old Trev-39 wrote:Hi Willow,
Where did you get your R.A.D. systems from? One I looked at from U.S.A. said could not be exported. Can get one from the U.K. Would prefer to buy in Australia if possible.
Cheers,
Trevor.
My McMillan Kestros stocks were specifically ordered with RADs. The one on my Cerus XR stock I specifically ordered from Hart shooting who make the RAD - no issue with getting it shipped to Australia. The new ones I am getting is through Matt P, but he ordered half a dozen at the time, so it just made sense.
-
- Posts: 1284
- Joined: Mon Dec 29, 2008 10:29 pm
-
- Posts: 387
- Joined: Wed Jul 15, 2009 11:10 pm
Re: R.A.D. systems
BATattack wrote:What do they weigh complete with a recoil pad?
I read an article they said aound 450gm complete with rubber etc , but the stock will need shortening and hollowed out so that will cancel some weight from the unit itself , looks well made and if it reduces fatigue why not ?
Return to “Equipment & Technical”
Who is online
Users browsing this forum: No registered users and 19 guests