FTR Bipod width?

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Message
Author
Tim N
Posts: 1337
Joined: Fri Jan 25, 2013 8:18 pm
Location: Branxton NSW

FTR Bipod width?

#1 Postby Tim N » Thu Dec 12, 2013 12:13 pm

Hi All,
Can someone let me know what the max width is for an FTR bipod?
Had a bit of a look(I can only do a man look).
Also does anyone do them with an offset to counter torque effect?

ecomeat
Posts: 1137
Joined: Tue Jun 01, 2010 11:07 pm
Location: Pimpama QLD

#2 Postby ecomeat » Thu Dec 12, 2013 12:32 pm

it would be great if someone can help Tim find an offset, torque countering bipod, coz then he would hopefully be shooting FT/R and not be in F Open taking Queens badges off poor deserving old fellas :lol: :lol:
Extreme accuracy and precision shooting at long range can be a very addictive pastime.

johnk
Posts: 2211
Joined: Sun Sep 07, 2008 7:55 pm
Location: Brisbane

#3 Postby johnk » Thu Dec 12, 2013 1:10 pm

If Sinclair had have thought it out just a tad more.......

saum2
Posts: 1052
Joined: Fri Jun 13, 2008 12:22 am

#4 Postby saum2 » Thu Dec 12, 2013 1:45 pm

Someone correct me if I'm wrong, (nicely)
I thought total weight was the main factor to be worried about in FTR. 8.25 Kgs which includes Rifle, scope & Bipod. Use whatever you fancy on your rifle as long as it's under the weight rule. Plus a few rules regarding the bipod feet and bag permitted.
Any weight projectiles in .223 or .308.
Geoff

AlanF
Posts: 7502
Joined: Wed Jun 15, 2005 8:22 pm
Location: Maffra, Vic

#5 Postby AlanF » Thu Dec 12, 2013 3:04 pm

As far as I know these are still the rules : http://www.icfra.co.uk/FCRules_2009.pdf

Regarding bipod width, there is no specified limit, and probably should be. But common sense would say that it couldn't be wide enough to cause space problems on the mound.

Range Mum
Posts: 153
Joined: Thu Apr 05, 2012 10:53 pm

#6 Postby Range Mum » Thu Dec 12, 2013 3:18 pm

For anyone interested look at :

http://www.icfra.co.uk/FCRules_2009.pdf

For any queries or question you may have ref: rules or dimensions

FTR for bi pods have no width restrictions but look at
Rule F2.2
Rule F 2.3
Rule F2.16
Rule F2.20.1

Now thanks to the S & T & NRAA for inclusion in the SSR's members should print off these rules and have them with them at ranges and displayed in club houses :)
knowledge is good :)
Jenni Hausler
Manager 2012/13 -
Bloemfontein S. Africa
Manager 2012/13 -
FCWC Raton - New Mexico

TOM
Posts: 381
Joined: Sat Jun 19, 2010 9:35 am

#7 Postby TOM » Thu Dec 12, 2013 4:14 pm

How would an offset bipod counteract torque?

Tim N
Posts: 1337
Joined: Fri Jan 25, 2013 8:18 pm
Location: Branxton NSW

#8 Postby Tim N » Thu Dec 12, 2013 4:50 pm

Hi Tom,
If the rifle torques anticlockwise and is offset to right(as you shoot)this increases the distance to the left foot on the bipod from the barrel which will make it lift more than twist. That's the best I can explain it.

AlanF
Posts: 7502
Joined: Wed Jun 15, 2005 8:22 pm
Location: Maffra, Vic

#9 Postby AlanF » Thu Dec 12, 2013 4:52 pm

TOM wrote:How would an offset bipod counteract torque?


Tom,

If a rifle is clamped firmly onto a bipod, the torque recoil will tend to tip the rifle and bipod over to the left. This can be reduced by having the bipod offset to the left. But its not all good, because the rifle will then tend to buck more vertically. So to counteract that you could move the bipod back a little etc. etc.

Alan

bsouthernau
Posts: 696
Joined: Sun Mar 11, 2012 4:31 pm

#10 Postby bsouthernau » Thu Dec 12, 2013 9:52 pm

AlanF wrote:
If a rifle is clamped firmly onto a bipod, the torque recoil will tend to tip the rifle and bipod over to the left.


I'm unaware of Krieger twisting their barrels the opposite way to the rest of the world - correct me if I'm wrong about this - but my rifle jumps vigorously to the right. Or is that because I'M left handed?

Barry

ecomeat
Posts: 1137
Joined: Tue Jun 01, 2010 11:07 pm
Location: Pimpama QLD

#11 Postby ecomeat » Thu Dec 12, 2013 10:01 pm

I thought mine did too......I am another Leftie.......till someone told me to go and have a close look at the front bag on my SEB Neo.
Now I know that it was bouncing to the RIGHT.....just after it bounced really vigorously to the left.
I now have to redistribute the sand (ie squeeze the front bag) before I shoot each string, coz with the 284 Win it get quite a marked depression on the left hand side after just 10-12 shots.
Extreme accuracy and precision shooting at long range can be a very addictive pastime.

Tim N
Posts: 1337
Joined: Fri Jan 25, 2013 8:18 pm
Location: Branxton NSW

#12 Postby Tim N » Fri Dec 13, 2013 5:09 am

I'm sure they torque anti clockwise after which they land to the right compressing that side of the bag.

Tim N
Posts: 1337
Joined: Fri Jan 25, 2013 8:18 pm
Location: Branxton NSW

#13 Postby Tim N » Fri Dec 13, 2013 5:11 am

Hey Tony should have read your post more closely, there I go with my man look again :lol:

AlanF
Posts: 7502
Joined: Wed Jun 15, 2005 8:22 pm
Location: Maffra, Vic

#14 Postby AlanF » Fri Dec 13, 2013 5:46 am

bsouthernau wrote:I'm unaware of Krieger twisting their barrels the opposite way to the rest of the world - correct me if I'm wrong about this - but my rifle jumps vigorously to the right. Or is that because I'M left handed?

Barry

Barry,

The initial torque effect will be anti-clockwise I'm sure. This happens very quickly, and what we often see is the rifle bouncing back, and the direction of jump can be due to other factors. Would be interesting to get a slow motion video to confirm. I can tell you that every offset BR stock I have seen has the fore-end widened to the left.

Alan

Barry Davies
Posts: 1384
Joined: Tue Aug 24, 2010 12:11 pm

#15 Postby Barry Davies » Fri Dec 13, 2013 7:32 am

The effect of torque is very very small --almost nothing. The recoil effect is however very large. What torque effect there is is to the left in a right hand spin barrel ( reaction )
What one thinks is torque effect is actually recoil effect, and may cause the rifle to jump either right or left depending upon outside influences.
An offset bipod will not counter recoil effects. A wider footprint will certainly help stability.
The recoil effect is only felt after the bullet has exited.


Return to “Equipment & Technical”

Who is online

Users browsing this forum: No registered users and 146 guests