.223 case capacity

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Message
Author
flatlina
Posts: 247
Joined: Tue Jul 06, 2010 9:38 pm
Location: Darwin NT

.223 case capacity

#1 Postby flatlina » Tue May 06, 2014 2:35 pm

Was wondering if anyone had tested nthe various .223 cases available to see which one holds the most powder.

Regards
john

saum2
Posts: 1050
Joined: Fri Jun 13, 2008 12:22 am

#2 Postby saum2 » Thu May 08, 2014 11:56 am

John,
I haven't done any scientific testing & my knowledge is limited to 2 cases;
In my opinion Lapua has more capacity than ADI brass. I haven't used any other brands. Sorry can't help much more than that. I've used both and lately used ADI with good results. I have plenty of speed with ADI.
Geoff

Brad Y
Posts: 2181
Joined: Fri Jun 26, 2009 8:21 pm

#3 Postby Brad Y » Thu May 08, 2014 12:30 pm

Remington held the most when I was playing with a 223 based wildcat for shooting furry things. I looked at winchester, remington and lapua.

johnk
Posts: 2211
Joined: Sun Sep 07, 2008 7:55 pm
Location: Brisbane

#4 Postby johnk » Thu May 08, 2014 1:12 pm

Lapua has/had two .223 cases & the Match has the greater capacity.

Chopper
Posts: 1022
Joined: Thu Jul 21, 2005 7:04 pm
Location: Albury

#5 Postby Chopper » Thu May 08, 2014 9:47 pm

TAKE CARE PUSHING A 223 CASE OF ANY TYPE :wink: Chop

Malcolm Hill
Posts: 329
Joined: Fri Aug 25, 2006 9:40 pm
Location: Mid North S.A.

#6 Postby Malcolm Hill » Thu May 08, 2014 10:53 pm

John
Some while ago the Accurate Shooter / 6Br website had all the case capacities listed in the 223 info section. I had a look and it is still there.
Regards Malcolm.

flatlina
Posts: 247
Joined: Tue Jul 06, 2010 9:38 pm
Location: Darwin NT

#7 Postby flatlina » Thu May 08, 2014 11:16 pm

Thanks for all the info/replies. I'll check out the 6br site. This is not for F Class but I will be shooting at the Bushranger 3 Gun Shoot in South Oz over the Queens Birthday weekend and they have a side match that has targets from 100 to 500+ that need to be shot as fast as you can. I'm putting a 22 - to 24" fluted 1-9 barrel on my Remington 7615. The main problem is that the OAL is limited to 2.260 to fit the mags. I want to get the most velocity from the 69 grain pills. That is assuming the load is accurate. Just a bit of fun.

Regards
john

Seddo
Posts: 555
Joined: Sun Sep 21, 2008 5:56 pm
Location: Latrobe Valley

#8 Postby Seddo » Fri May 09, 2014 9:08 am

the best way to gain capacity is to have a longer throat.
----------------------
Seddo

Moe City Rifle Club

flatlina
Posts: 247
Joined: Tue Jul 06, 2010 9:38 pm
Location: Darwin NT

#9 Postby flatlina » Fri May 09, 2014 11:41 am

I will be long throating and free bore on this one. That was how the weatherbys could get their velocity.

Regards
jb

Seddo are you going to come to BushRanger?? Not too far for you.

Seddo
Posts: 555
Joined: Sun Sep 21, 2008 5:56 pm
Location: Latrobe Valley

#10 Postby Seddo » Fri May 09, 2014 12:47 pm

i haven't thought about it yet, too much on my plate at work this time of year.

I have a long throated 223 that takes 26gr of 2208 and ISNT compressed.
----------------------

Seddo



Moe City Rifle Club


Return to “Equipment & Technical”

Who is online

Users browsing this forum: No registered users and 19 guests