CCW ENGINEERING
Moderator: Mod
-
- Posts: 101
- Joined: Tue Oct 22, 2013 6:59 pm
CCW ENGINEERING
Hi all fellow shooters
I'm running a small engineering service producing high quality machined and fabricated parts to
farming, automotive, firearm, and other industrial divisions. I have now made a few sets of knobs to replace the cheap plastic ones on the caldwell rests. I have Remington action sleeves in the works for people wanting to have a flat bottom panda footprint sleeve for both S/A and L/A footprint. I have just finished a few barnard action wrenches as shown in the photos. I will be continually adding items to my stocks as I see the need for them I will update as this happens
Theres some photo's of my other work here http://www.busseltonrc.com/ccw-eng-gunsmithing
contact me for pricing on anything you need either via pm here, Facebook or ccwengineering@outlook.com
Thanks
Chris
I'm running a small engineering service producing high quality machined and fabricated parts to
farming, automotive, firearm, and other industrial divisions. I have now made a few sets of knobs to replace the cheap plastic ones on the caldwell rests. I have Remington action sleeves in the works for people wanting to have a flat bottom panda footprint sleeve for both S/A and L/A footprint. I have just finished a few barnard action wrenches as shown in the photos. I will be continually adding items to my stocks as I see the need for them I will update as this happens
Theres some photo's of my other work here http://www.busseltonrc.com/ccw-eng-gunsmithing
contact me for pricing on anything you need either via pm here, Facebook or ccwengineering@outlook.com
Thanks
Chris
You do not have the required permissions to view the files attached to this post.
-
- Posts: 2181
- Joined: Fri Jun 26, 2009 8:21 pm
-
- Posts: 101
- Joined: Tue Oct 22, 2013 6:59 pm
Re: CCW ENGINEERING
I'm adding additional products to my stocks I've just finished a run of barrel vices. They will accept a 1.35" barrel spring loaded top to keep it from marking the barrel while inserting. High tensile studs and nuts.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 33
- Joined: Wed May 13, 2015 1:38 pm
Re: CCW ENGINEERING
Love your work Chris.
If you had a Remington Bolt Spanner so I can 'ease springs' on my Remmy bolts I would love to buy one.
One that works on a Stiller action would be useful too....
Alan
If you had a Remington Bolt Spanner so I can 'ease springs' on my Remmy bolts I would love to buy one.
One that works on a Stiller action would be useful too....
Alan
-
- Posts: 1137
- Joined: Tue Jun 01, 2010 11:07 pm
- Location: Pimpama QLD
Re: CCW ENGINEERING
Chris,
How much for one of your barrel vices, posted to 4285, Qld ?
I am just about sick of my old "2 Bolt" model that keeps slipping on me
Tony
How much for one of your barrel vices, posted to 4285, Qld ?
I am just about sick of my old "2 Bolt" model that keeps slipping on me
Tony
Extreme accuracy and precision shooting at long range can be a very addictive pastime.
-
- Posts: 101
- Joined: Tue Oct 22, 2013 6:59 pm
Re: CCW ENGINEERING
For anyone who is interested in the barrel vices they are $135 including post anywhere in Aus. I have a few left from the first batch but more will be going into production within the next week. Barnard and remington type action wrenches will be done in a similar time frame.
Thanks all for the interest.
Thanks all for the interest.
-
- Posts: 101
- Joined: Tue Oct 22, 2013 6:59 pm
Re: CCW ENGINEERING
Barrel block all finished up today for one of the members on here.
You do not have the required permissions to view the files attached to this post.
Last edited by chrisw91 on Tue Jun 07, 2016 6:54 pm, edited 1 time in total.
-
- Posts: 837
- Joined: Fri Jul 23, 2010 10:21 pm
- Location: Gippsland, Victoria
-
- Posts: 307
- Joined: Tue Jul 26, 2005 8:45 am
- Location: Wollongong
-
- Posts: 48
- Joined: Fri Aug 24, 2012 8:54 pm
- Location: Gold Coast
-
- Posts: 101
- Joined: Tue Oct 22, 2013 6:59 pm
Re: CCW ENGINEERING
I've been adding a few more items to my inventory. I now have Remington/ clone action wrenches in stock. These f class or BR rifle cradles are now also available. They made from 316 with surgical silicon tube to prevent the rifles being scratched. Rubber feet to stop them moving around if using to clean. Contact for pricing.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 101
- Joined: Tue Oct 22, 2013 6:59 pm
Re: CCW ENGINEERING
There's been a few people asking about action sleeves to suit rem short and long actions. I've just finished this one. They will have a pinned rail fitted in any cant you may want. They are 9.5" long 1.65" wide.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 58
- Joined: Thu Nov 15, 2012 8:17 pm
- Location: Melbourne
Re: CCW ENGINEERING
GDay Chris
You wouldn't be doing the sleeves for the Rem 600 actions would you ?
Cheers
Darren
You wouldn't be doing the sleeves for the Rem 600 actions would you ?
Cheers
Darren
-
- Posts: 162
- Joined: Thu Feb 25, 2016 11:07 am
- Location: Qld
-
- Posts: 44
- Joined: Mon Sep 14, 2015 3:49 pm
Return to “Supplier News and Discussion”
Who is online
Users browsing this forum: No registered users and 12 guests