Carbon fibre barrels

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Tim N
Posts: 1341
Joined: Fri Jan 25, 2013 8:18 pm
Location: Branxton NSW
Has thanked: 102 times
Been thanked: 511 times

Carbon fibre barrels

Post by Tim N »

Hi All
I'm considering FTR and was wondering if anyone has had experience with these barrels ?
We don't rise to the level of our expectations, we fall to the level of our training. Archilochos 680-645 BC
Pommy Chris
Posts: 441
Joined: Tue Oct 21, 2014 12:05 pm
Has thanked: 33 times
Been thanked: 102 times

Re: Carbon fibre barrels

Post by Pommy Chris »

NO experience of them, but I have heard them mentioned, but I cant really see why you would want one. Weight is an issue with FTR, but I am under weight with a Competition Nightforce scope, quite a heavy hardwood ply stock and a Barnard action with a Border medium Palma barrel which are quite heavy as they are long barrels. My current bipod is a modded Sinclair one which is quite heavy to start with and I have added weight to stiffen it up (over 800g I cant remember exactly). I made a prototype ftr bipod which the missus is currently using and it is very stable indeed and it is only 500g. In her gun she could have a stand that was over a kg if she wanted and still have weight spare. My feeling is you want weight up front or your gun is going to leap all over the place.
Regards
Chris
Craig McGowan
Posts: 191
Joined: Fri Jan 11, 2013 11:10 pm
Location: Brisbane
Been thanked: 29 times
Contact:

Re: Carbon fibre barrels

Post by Craig McGowan »

Hello Tim,

I think it is an expensive option for the weight saved. OSA offer a complete rifle but no barrel blanks. They maybe able to do a individual barrel, but the cost would be prohibitive.

There is a New Zealand Company ( Bronco Sports ) that is making complete rifles and barrles, but again they may not do unchambered barrels. This may be a cheaper option if they are willing to produce a barrel?

If you are serious about it, send me a email or pm.

Bula ( From Fiji ).
RDavies
Posts: 2336
Joined: Sun Feb 12, 2006 7:23 pm
Location: Singleton NSW
Has thanked: 715 times
Been thanked: 760 times

Re: Carbon fibre barrels

Post by RDavies »

If I could get a very stiff 34" long barrel I wouldn't mind one as long as the actual barrel bore quality was good. Advertised as handling long shot strings better which might be a side benefit??

I don't know if Christensen Arms will make a barrel the size and twist we are after. http://www.christensenarms.com/products ... s/barrels/
mike H
Posts: 630
Joined: Mon May 08, 2006 5:34 pm
Location: JUNEE NSW
Has thanked: 40 times
Been thanked: 108 times

Re: Carbon fibre barrels

Post by mike H »

Tim N wrote:Hi All
I'm considering FTR and was wondering if anyone has had experience with these barrels ?

Tim,
Get over it,it is a solution to a problem that doesn't exist,but then creates it's own problems.My only experience with them is observing one at Raglan in 2010. A British visitor had one,I think it was well used but it was still OK at home before he left.Once it warmed up it started to drop shots big time,
Mike.
Tim N
Posts: 1341
Joined: Fri Jan 25, 2013 8:18 pm
Location: Branxton NSW
Has thanked: 102 times
Been thanked: 511 times

Re: Carbon fibre barrels

Post by Tim N »

Hi All,
Thanks for the replys.
Mike, I'm involved with bridge building so "getting over it" shouldn't be a problem :)
Sounds like it's not required, but as technology increases everyone is looking for improvements.
Arrivederci(from Italy)
We don't rise to the level of our expectations, we fall to the level of our training. Archilochos 680-645 BC
RDavies
Posts: 2336
Joined: Sun Feb 12, 2006 7:23 pm
Location: Singleton NSW
Has thanked: 715 times
Been thanked: 760 times

Re: Carbon fibre barrels

Post by RDavies »

Tim N wrote:Sounds like it's not required, but as technology increases everyone is looking for improvements.
Arrivederci(from Italy)


They aren't required, but then again, neither are composite stocks, sleeved aluminium (or titanium) actions, $3000 scopes, carbon fibre bipods etc.
plumbs7
Posts: 1124
Joined: Wed Feb 12, 2014 7:32 am
Location: Dalby/ Tara Rifle Club
Has thanked: 177 times
Been thanked: 9 times

Re: Carbon fibre barrels

Post by plumbs7 »

They aren't required, but then again, neither are composite stocks, sleeved aluminium (or titanium) actions, $3000 scopes, carbon fibre bipods etc. quote:

Yep ... How many times I've been beaten by a $300 Omark with cheap nikko Stirling ! Lol!
Pommy Chris
Posts: 441
Joined: Tue Oct 21, 2014 12:05 pm
Has thanked: 33 times
Been thanked: 102 times

Re: Carbon fibre barrels

Post by Pommy Chris »

plumbs7 wrote:They aren't required, but then again, neither are composite stocks, sleeved aluminium (or titanium) actions, $3000 scopes, carbon fibre bipods etc. quote:

Yep ... How many times I've been beaten by a $300 Omark with cheap nikko Stirling ! Lol!

A bit off topic, and Omarks are great, I have two and the missus has one also, but we both have Barnards too... The big but is both our shooting has come leaps and bounds with the Barnards. Scope wise too I won a comp JUST BECAUSE I had a new Competition Nightforce. I was in the top couple, I watched the flags went to pull the trigger and through the scope I saw the mirage change direction. I looked up and saw the flags had changed and I saw a few 5's and 4's too a few seconds later on other targets. My old Sightron would not show these subtle changes and it is not a bad scope, so clear so as much as good gear is not needed it does make a difference when you need every point.
Chris
plumbs7
Posts: 1124
Joined: Wed Feb 12, 2014 7:32 am
Location: Dalby/ Tara Rifle Club
Has thanked: 177 times
Been thanked: 9 times

Re: Carbon fibre barrels

Post by plumbs7 »

Hey Chris , ya preaching to the converted ! Luv nightforce ! Great to hear ya shooting well! Just don't shoot the wrong target three times like some other peanut I know who looks bit like me ! Lol!
Pommy Chris
Posts: 441
Joined: Tue Oct 21, 2014 12:05 pm
Has thanked: 33 times
Been thanked: 102 times

Re: Carbon fibre barrels

Post by Pommy Chris »

plumbs7 wrote:Hey Chris , ya preaching to the converted ! Luv nightforce ! Great to hear ya shooting well! Just don't shoot the wrong target three times like some other peanut I know who looks bit like me ! Lol!

I almost did at the Queens and just as I was squeezing the trigger the target went down. It took me a second to realize what was going on. If it was the new electronic targets being used at the time I would not have got away with it :D
Chris
Post Reply Previous topicNext topic