Hi Guys, Thanks for adding me to you Forum,
Im just staring out in Fclass and have a couple of Omarks, one of which I have owned for over 20 years and another I recently acquired but both are almost shot out barrel wise so I will be upgrading them as time and money goes. I will be needing a couple of new barrels either Omark or ones I can use with an adaptor. I am also chasing a good unmolested M44b stock if anyone has one laying around.
Cheers Paul
New member
Moderator: Mod
-
Cutanything
- Posts: 162
- Joined: Thu Feb 25, 2016 11:07 am
- Location: Qld
- Has thanked: 6 times
- Been thanked: 5 times
-
plumbs7
- Posts: 1124
- Joined: Wed Feb 12, 2014 7:32 am
- Location: Dalby/ Tara Rifle Club
- Has thanked: 177 times
- Been thanked: 9 times
Re: New member
Hi Paul and welcome! I have an Omark in Lw stock , bought it for $350 , had 300 rounds on a 1996 Mab barrel , threw a scope and rail on it and it absolutly hammers the x ring at 600 yds ( if I Do my part ) .
Nothing wrong with Omarks except extraction issues. ( I'm lucky mine is fine thanks to D Linsly gun smith of Dalby Qld). I spent a lot of Money on my Rem when I had a hummer in the gun safe and always overlooked it !
Good luck Mate !
Nothing wrong with Omarks except extraction issues. ( I'm lucky mine is fine thanks to D Linsly gun smith of Dalby Qld). I spent a lot of Money on my Rem when I had a hummer in the gun safe and always overlooked it !
Good luck Mate !
Re: New member
Hi lads,
Just aquired a omark 44 myself which I am doing up. Had to modify the stock because I am a LH shooter but have no drama with a RH action. Been knocking out some good scores with the club rifle (Omark) since I started loading up my own ammo. Cant wait to scope up my rifile and tidy her up so I can give her a spin.
Just aquired a omark 44 myself which I am doing up. Had to modify the stock because I am a LH shooter but have no drama with a RH action. Been knocking out some good scores with the club rifle (Omark) since I started loading up my own ammo. Cant wait to scope up my rifile and tidy her up so I can give her a spin.
-
Cutanything
- Posts: 162
- Joined: Thu Feb 25, 2016 11:07 am
- Location: Qld
- Has thanked: 6 times
- Been thanked: 5 times
Re: New member
For those of use that like omark i have been in contact with tse engineering regularly of late i have ordered barrel adapter which there is approximently 12 left in stock and also 20moa rails x2 so if anyone else is after either items email them on info@tsengineering.com.au
-
LoneRider
- Posts: 60
- Joined: Mon Jul 06, 2015 4:36 pm
-
Cutanything
- Posts: 162
- Joined: Thu Feb 25, 2016 11:07 am
- Location: Qld
- Has thanked: 6 times
- Been thanked: 5 times
-
LoneRider
- Posts: 60
- Joined: Mon Jul 06, 2015 4:36 pm
-
Razer
- Posts: 533
- Joined: Tue Mar 04, 2008 8:44 pm
- Location: Orange,N.S.W.
- Has thanked: 166 times
- Been thanked: 8 times
Re: New member
LoneRider wrote:Cutanything wrote:$295 for adapter. $15 for postage
damn,gone up from 2 months ago...
Makes good 2nd hand Omarks with a reasonable stock and adaptor cheap buying.
If already with an adaptor, it would also most likely have a reasonable barrel.
Re: New member
These adapters are not cheap.
I have a spare Omark that will be sold it or parted out soon.
It has a adapter , heavy fluted 308 stainless barrel.
Davies 2 stage trigger
Alloy bedded tr stock
Rear peep sites.
It's a old girl with a DA serial number .
The rifle is still at the work and I am waiting for my pta to bring it home .
If any of the items or package maybe of interest feel free to let me know .
JH
I have a spare Omark that will be sold it or parted out soon.
It has a adapter , heavy fluted 308 stainless barrel.
Davies 2 stage trigger
Alloy bedded tr stock
Rear peep sites.
It's a old girl with a DA serial number .
The rifle is still at the work and I am waiting for my pta to bring it home .
If any of the items or package maybe of interest feel free to let me know .
JH
-
Cutanything
- Posts: 162
- Joined: Thu Feb 25, 2016 11:07 am
- Location: Qld
- Has thanked: 6 times
- Been thanked: 5 times
-
david6855
- Posts: 15
- Joined: Sun Aug 28, 2016 12:59 am
Re: New member
I am in 2 minds about the adaptors, what are peoples thoughts about using the old barrel stub as an adaptor as the bolt is alraedy matched to the locking lugs, any opinions?
Menu
Newest members