SAUM fired case capacity

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Post Reply Previous topicNext topic
AlexE
Posts: 219
Joined: Fri Feb 16, 2018 9:18 am
Has thanked: 2 times
Been thanked: 14 times

SAUM fired case capacity

Post by AlexE »

Hi Guys,

Is anyone able to share what their measured h20 capacity of a fired Norma 7 SAUM case is? Just about to start load development using quickload for a headstart.

Cheerio,
Alex
Top
Audax
Posts: 38
Joined: Wed Sep 27, 2017 8:48 am
Has thanked: 2 times
Been thanked: 7 times

Re: SAUM fired case capacity

Post by Audax »

72.60gr water trimmed to 2.020". Do not trust data for ADI AR2213 in QL. Unless you have the data for ADI AR2213sc use another powder...!
Top
AlexE
Posts: 219
Joined: Fri Feb 16, 2018 9:18 am
Has thanked: 2 times
Been thanked: 14 times

Re: SAUM fired case capacity

Post by AlexE »

Audax wrote:72.60gr water trimmed to 2.020". Do not trust data for ADI AR2213 in QL. Unless you have the data for ADI AR2213sc use another powder...!

Thanks - that's just what I needed. :D

As for 2213SC in quickload, use Hodgdon 4831sc - it's the same powder. I went a step further and renamed it in the data file and deleted the old 2213 line in the powder file. Has worked well across a few calibres now.

Cheerio,
Alex
Top
Post Reply Previous topicNext topic

Return to “Equipment & Technical”