6mm 1-7.5 twist rate

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Grunter
Posts: 13
Joined: Thu Aug 16, 2018 8:56 pm

6mm 1-7.5 twist rate

Post by Grunter »

Hi all was looking at peoples experience with this twist rate. Question is lm looking at shooting 75g Speer HP In a 1-7.5 twist rate, does any know if they will shoot accurately enough?
ben_g
Posts: 300
Joined: Sun Apr 24, 2016 7:37 pm
Has thanked: 7 times
Been thanked: 114 times

Re: 6mm 1-7.5 twist rate

Post by ben_g »

What cartridge?

If the bullets don’t blow up from being overspun it should still be accurate.

Question begs to be asked..... why??
saum2
Posts: 1119
Joined: Fri Jun 13, 2008 12:22 am
Has thanked: 11 times
Been thanked: 111 times

Re: 6mm 1-7.5 twist rate

Post by saum2 »

I agree Ben, twist rate may blow up the 75gn speers. Most use that twist rate for 100-115gn projectiles.
Grunter
Posts: 13
Joined: Thu Aug 16, 2018 8:56 pm

Re: 6mm 1-7.5 twist rate

Post by Grunter »

Thinking of buying a Howa 6mm creedmoor barreled action. I have shot the 75g hp speers out of 243 and was very impressed with there results and they are cheap. Was looking at this as an alrounder set up.
willow
Posts: 599
Joined: Sat Aug 15, 2015 9:51 pm
Has thanked: 62 times
Been thanked: 221 times

Re: 6mm 1-7.5 twist rate

Post by willow »

If you're going for a 6mm creedmoor you'd be better off looking at 95gr pills and heavier for what is a pretty aggressive twist rate.
bruce moulds
Posts: 2900
Joined: Sun Jun 19, 2005 4:07 pm
Has thanked: 413 times
Been thanked: 330 times

Re: 6mm 1-7.5 twist rate

Post by bruce moulds »

nosler ballistic tip varmint bullets will often withstand fast spinning when conventional bullets will not.
this is probably due to the solid base of the nosler jacket.
at least this has been my experience in 22 cal fast twist converted to varmint rifle.
at the fast spin rate they have very explosive terminal performance.
keep safe,
bruce,
"SUCH IS LIFE" Edward Kelly 11 nov 1880
http://youtu.be/YRaRCCZjdTM
Post Reply Previous topicNext topic