1000yd wind zero

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

bsouthernau
Posts: 696
Joined: Sun Mar 11, 2012 4:31 pm
Has thanked: 1 time
Been thanked: 40 times

1000yd wind zero

Post by bsouthernau »

Hoping someone can confirm I've got this right. If I've got a close range wind zero will I need to put on about 3/4 of a minute left for 1000yds in calm conditions?

Barry
bshrestha01
Posts: 125
Joined: Tue Mar 25, 2014 8:43 am
Location: Sydney, NSW

Re: 1000yd wind zero

Post by bshrestha01 »

If there is 0 wind, there is no need to put on any wind on any range.

A straight will not curve just because it is long.
Sportco Omark M44 6mmBR Maddco barrel Mueller 8-32x40
Savage 12 FTR with 7mm Bartlein and NightForce Benchrest 12-42x52
Mauser m96 Swede 6.5x55 with Tasco 3-9x40
Parker Hale m84 .308 with Weekes Stock and TruFlite Barrel
Howa 1500 .223 with Tasco 6-24x40
ratshot
Posts: 273
Joined: Sat Apr 15, 2006 9:34 pm
Location: Corryong

Re: 1000yd wind zero

Post by ratshot »

Yep depends on twist rate etc but spin drift does come in to it at the longs .some of my barrels can be 1/2 to 1 out .most of my wind zeros are at a 1000 if and when you get a good day to do it as it not that often I shoot shorts and it is likely to be a different scope or rifle. cheers Paul...
shooter mcreid
Posts: 322
Joined: Sat Mar 01, 2014 5:26 pm
Location: Ipswich
Has thanked: 5 times
Been thanked: 6 times

Re: 1000yd wind zero

Post by shooter mcreid »

Barry, are you referring to spin drift? A bullet out of a right twist barrel will ever so slightly drift to the right. By how much depends on the projectile and velocity.
What projectile are you using at what speed? And barrel twist?
bsouthernau
Posts: 696
Joined: Sun Mar 11, 2012 4:31 pm
Has thanked: 1 time
Been thanked: 40 times

Re: 1000yd wind zero

Post by bsouthernau »

Thanks guys. FWIW 210gr SMK at 2690 from a 1:10. I reckoned about 8" less a couple for coriolis in this part of the world.

Of course it will probably pale into total insignificance seeing as I'm going to the accursed godforsaken Lower Light range where I'll be deciding whether to put on 20 or 25 minutes of wind!!

Cheers
johnk
Posts: 2211
Joined: Sun Sep 07, 2008 7:55 pm
Location: Brisbane
Has thanked: 71 times
Been thanked: 92 times

Re: 1000yd wind zero

Post by johnk »

Barry,

I shot my MR at 500 yards yesterday & yes, it seemed to be carrying about ½ MOA right zero over what worked the previous weekend at Raglan. That's with 210 Berger VLDs running at around 2670.

John
jasmay
Posts: 1326
Joined: Fri Sep 28, 2012 9:26 pm
Has thanked: 184 times
Been thanked: 392 times

Re: 1000yd wind zero

Post by jasmay »

Barry, quite a few of the ballistic calcs have this function these days.

If your like me shooting heavies out of tight twists, fast when you get to 900+ you will notice it!

Spin drift is real!
BATattack
Posts: 1345
Joined: Mon Dec 29, 2008 10:29 pm
Has thanked: 92 times
Been thanked: 280 times

Re: 1000yd wind zero

Post by BATattack »

bsouthernau wrote:Thanks guys. FWIW 210gr SMK at 2690 from a 1:10. I reckoned about 8" less a couple for coriolis in this part of the world.

Of course it will probably pale into total insignificance seeing as I'm going to the accursed godforsaken Lower Light range where I'll be deciding whether to put on 20 or 25 minutes of wind!!

Cheers



Haha haha yep had bit of a play at the longs over the last couple of months out there and had nothing under 5moa on and some fast changes so at the longs I doubt you'll notice it.

Biggest tip is practice. Practice setting your gear up while trying to stop your mat blowing away.
bsouthernau
Posts: 696
Joined: Sun Mar 11, 2012 4:31 pm
Has thanked: 1 time
Been thanked: 40 times

Re: 1000yd wind zero

Post by bsouthernau »

BATattack wrote:
Biggest tip is practice. Practice setting your gear up while trying to stop your mat blowing away.


I've got well developed skills at that - it blows a bit here at Rosedale from time to time too. Biggest problem is trying to stop my caravan annex getting blown to shreds while I'm shooting.
bsouthernau
Posts: 696
Joined: Sun Mar 11, 2012 4:31 pm
Has thanked: 1 time
Been thanked: 40 times

Re: 1000yd wind zero

Post by bsouthernau »

jasmay wrote:Barry, quite a few of the ballistic calcs have this function these days.


Hi Jason

The one you get with Bryan Litz's book claims to do it but doesn't - well not on my ageing computer anyway. Just gives me a bunch of zeroes.
shooter mcreid
Posts: 322
Joined: Sat Mar 01, 2014 5:26 pm
Location: Ipswich
Has thanked: 5 times
Been thanked: 6 times

Re: 1000yd wind zero

Post by shooter mcreid »

Formula gives 6.5 inches and ballistic app gives 0.75 moa for your data.
So I guess that confirms what you had.
AlanF
Posts: 7532
Joined: Wed Jun 15, 2005 8:22 pm
Location: Maffra, Vic
Has thanked: 229 times
Been thanked: 936 times

Re: 1000yd wind zero

Post by AlanF »

Barry,

The SARA Queens series only goes to 800. Are you shooting one of the other LR events?

Alan
johnk
Posts: 2211
Joined: Sun Sep 07, 2008 7:55 pm
Location: Brisbane
Has thanked: 71 times
Been thanked: 92 times

Re: 1000yd wind zero

Post by johnk »

dave
Posts: 125
Joined: Tue Jun 21, 2005 1:18 pm
Been thanked: 19 times

Re: 1000yd wind zero

Post by dave »

for long/short range zeroes,it also helps if the axis of the bore, mounts and scope align in the vertical plane.

cheers
dave
mike H
Posts: 630
Joined: Mon May 08, 2006 5:34 pm
Location: JUNEE NSW
Has thanked: 40 times
Been thanked: 108 times

Re: 1000yd wind zero

Post by mike H »

It only matters if the wind goes over centre Barry.The only successes I have had at long ranges,the wind velocity may have changed a bit,but have always been constant from one side.Flat out at the moment loading ammo for Lower Light.Hope to catch up with the Match Rifle and Long Range F/class crew there. The plan is to shoot FTR in the Queen's,then follow on with Match Rifle.
Mike.
Post Reply Previous topicNext topic