6mmbr loads first time reloading

[jmc]

Hi all just got my hands on a 6mmbr I'm after starting loads to try the rifle is a tikka t3 with a 1in8 twist 26inch barrel came with no load dater told is has done 30 rounds in total any information would be much appreciated thanks

[AlanF]

jmc,

Around 30 grains of 2208 with +/-105gn projectiles and CCI 450 primers would be a good place to start.

Alan

[jmc]

Thanks Alan what bullets should I be trying berger, copperhead?

[AlanF]

Thanks Alan what bullets should I be trying berger, copperhead?

Both 105 Bergers and 103 Copperheads are very highly regarded, and don't rule out SMK 107s. The best thing about the 6BR is how easy they are to load for.

[jmc]

Will rem 7.5 primers be ok it's all I can get locally at the moment ?

[AlanF]

I seem to remember some people having trouble with Remington 7½s - something about being a bit softer in the cup, susceptible to damage if your firing pin is a loose fit. Others may have direct experience.

[Seddo]

I've found remington primers to be harder then federals.