Search found 110 matches

by Trevor Rhodes
Mon Feb 18, 2019 8:05 pm
Forum: General Forum
Topic: Problems with CCI 450s
Replies: 49
Views: 3525

Re: Problems with CCI 450s

Hi Trev Protrusion isn't the problem, when were the springs last replaced ?? If they haven't been replaced in the life of the action, that would be my first recommendation. The other thing to check is that the pin isn't dragging, easiest way the check is remove the cap and cocking sleeve and make s...
by Trevor Rhodes
Mon Feb 18, 2019 7:45 pm
Forum: General Forum
Topic: Problems with CCI 450s
Replies: 49
Views: 3525

Re: Problems with CCI 450s

Trevor Have you measured your pin protrusion ? I haven't seen a Barnard out of spec yet, but there's always a first. Yes there is an aftermarket titanium pin available but the reduction in mass (wont help pin impact) and the increased bolt lift isn't very attractive. Do you have misfires with neck ...
by Trevor Rhodes
Mon Feb 18, 2019 3:02 pm
Forum: General Forum
Topic: Problems with CCI 450s
Replies: 49
Views: 3525

Re: Problems with CCI 450s

I'm still using federals since last post and still no miss fires. Can the Barnard firing pins be adjusted? Someone told me there is a Barnard firing pin with washers like the RPA for sale, any idea who is selling them. Trevor Have you measured your pin protrusion ? I haven't seen a Barnard out of s...
by Trevor Rhodes
Thu Feb 14, 2019 7:07 pm
Forum: General Forum
Topic: Problems with CCI 450s
Replies: 49
Views: 3525

Re: Problems with CCI 450s

I'm still using federals since last post and still no miss fires. Can the Barnard firing pins be adjusted? Someone told me there is a Barnard firing pin with washers like the RPA for sale, any idea who is selling them.
by Trevor Rhodes
Sun Feb 03, 2019 8:31 am
Forum: General Forum
Topic: A & D FX120i scales
Replies: 7
Views: 495

Re: A & D FX120i scales

Thanks everyone, there is a variation in prices around Australia but scale shop seems to by the cheapest. I think John will be happy to go there.
by Trevor Rhodes
Sat Feb 02, 2019 8:16 pm
Forum: General Forum
Topic: A & D FX120i scales
Replies: 7
Views: 495

Re: A & D FX120i scales

Have you a contact No. or address of this supplier.
Thanks Trevor
by Trevor Rhodes
Sat Feb 02, 2019 5:13 pm
Forum: General Forum
Topic: A & D FX120i scales
Replies: 7
Views: 495

A & D FX120i scales

Looking for a shop that sells these scales for a mate. I purchased one 10 years ago for $1430 (local) same shop tells me they are not making them now, saying the 300i has taken over at $1200. Can remember a while a go someone indicated that South Aust some where was sell them. Are the 300i the same ...
by Trevor Rhodes
Sat Feb 02, 2019 4:55 pm
Forum: Full-bore/Target Rifle
Topic: range mat
Replies: 6
Views: 473

Re: range mat

Joe Balls are the best and cheapest mats out.
by Trevor Rhodes
Tue Jan 29, 2019 2:49 pm
Forum: For Sale/Wanted to Buy
Topic: Wanted - F class bipod. Davies or other
Replies: 4
Views: 455

Re: Wanted - F class bipod. Davies or other

Danny you never know when you might need something that you have sitting around.
by Trevor Rhodes
Tue Jan 29, 2019 2:46 pm
Forum: General Forum
Topic: Problems with CCI 450s
Replies: 49
Views: 3525

Re: Problems with CCI 450s

I have changed over to Federal gold match primers and bingo no more miss fires.
by Trevor Rhodes
Fri Jan 25, 2019 8:56 pm
Forum: For Sale/Wanted to Buy
Topic: Wanted - F class bipod. Davies or other
Replies: 4
Views: 455

Re: Wanted - F class bipod. Davies or other

Anthony l have a Davies never been used $150
by Trevor Rhodes
Tue Jan 15, 2019 9:03 pm
Forum: Equipment & Technical
Topic: Submerging barrels in cleaning solutions
Replies: 32
Views: 2204

Re: Submerging barrels in cleaning solutions

williada wrote:Hey Trev, I would be interested to know, and assuming the Helmar was not contaminated by dipping the jag and patch into the bottle, whether you got anymore blue on the patch having previously cleaned it with Boretech and wiped out?

l use alum jags but rely on the borescope.
by Trevor Rhodes
Tue Jan 15, 2019 6:28 pm
Forum: Equipment & Technical
Topic: Submerging barrels in cleaning solutions
Replies: 32
Views: 2204

Re: Submerging barrels in cleaning solutions

Helmar is great stuff, after cleaning l bore scope and carbons is gone. Just don't over scrub or you need a range for it to settle down. The Helmar copper remover isn't as good, needs improving. Trevor ,I will have to disagree! My testing over the last 12 months has shown me that the Copper Remover...
by Trevor Rhodes
Mon Jan 14, 2019 8:50 pm
Forum: Equipment & Technical
Topic: Submerging barrels in cleaning solutions
Replies: 32
Views: 2204

Re: Submerging barrels in cleaning solutions

Helmar is great stuff, after cleaning l bore scope and carbons is gone. Just don't over scrub or you need a range for it to settle down. The Helmar copper remover isn't as good, needs improving.
by Trevor Rhodes
Thu Jan 03, 2019 8:16 am
Forum: General Forum
Topic: George Wittorff hunter class
Replies: 100
Views: 6178

Re: George Wittorff hunter class

Pete, That's about right my yearly subs are around $500 plus $15 range fees for a Saturday afternoon. The "club" part is about $60 from memory and rest is NRAA/NSWRA plus a fee to the range complex which pays rent to the State Gov and running costs of the range. Regards Matt P Matt what w...

Go to advanced search