Does anyone know if stocks can be imported from the US without the government getting involved. Are there any permits involved?
Pete
Importing Rifle Stocks?
Moderator: Mod
-
- Posts: 576
- Joined: Sat Aug 15, 2015 9:51 pm
Re: Importing Rifle Stocks?
PeteFox wrote:Does anyone know if stocks can be imported from the US without the government getting involved. Are there any permits involved?
Pete
There's buggerall to do at this end - it's getting it out of the US, so you need to look at companies who export direct, or use a third party to export.
-
- Posts: 390
- Joined: Wed Jul 15, 2009 11:10 pm
Re: Importing Rifle Stocks?
Depends on the value , with current exchange rate may put you over $1k au , then you’ll be slugged bit for this bit for that and some more because they can , I went through this with a Kelbly stock 2 1/2 yrs ago didn’t save anything in the end
-
- Posts: 210
- Joined: Tue Jan 30, 2018 12:58 pm
Re: Importing Rifle Stocks?
The US companies need a permit to export. As part of that permit that have to show they are exporting to an approved country and are meeting that countries requirements, which leads to....If the importing country doesn't need a permit then a letter clarifying this and a reference in the letter to the relevant import section is all that is needed....in my case anyways. The exporter then attaches all of this paperwork to the parcel for customs to peruse.
You will have to pay export permits from out of the US (us $110 from memory a couple of years ago) and all of the import duties etc.
kelblys are very very good to deal with.
You will have to pay export permits from out of the US (us $110 from memory a couple of years ago) and all of the import duties etc.
kelblys are very very good to deal with.
-
- Posts: 1052
- Joined: Fri Jun 13, 2008 12:22 am
Re: Importing Rifle Stocks?
Why don't you use an Australian stock maker? plenty to choose from any many design options. Quite a few on this site.
-
- Posts: 189
- Joined: Fri Mar 17, 2017 7:58 pm
Re: Importing Rifle Stocks?
I kind of like the Cerus stocks from the US but the exchange rate would make them pretty expensive. I would like a butt stock like on a F open rifle but the beaver tail type long forarm as it would be a Fstd of a bipod rifle. In a nice wood the lamination's like the Cerus seem to be a good compromise of classic look but still with the strength of a laminate.
-
- Posts: 621
- Joined: Tue Oct 16, 2018 5:20 pm
- Location: 7321 Tas.
Re: Importing Rifle Stocks?
saum2 wrote:Why don't you use an Australian stock maker? plenty to choose from any many design options. Quite a few on this site.
Because left hand shooters are barely catered for here, and when you do find a LH stock it is offered inletted for a RH action. I’m after something off the shelf so I can remove the stock from my PSR rifle replace for farm use. When I come across this ridiculous s...t I tend to vote with my wallet.
Pete
-
- Posts: 1052
- Joined: Fri Jun 13, 2008 12:22 am
Re: Importing Rifle Stocks?
PeteFox wrote:saum2 wrote:Why don't you use an Australian stock maker? plenty to choose from any many design options. Quite a few on this site.
Because left hand shooters are barely catered for here, and when you do find a LH stock it is offered inletted for a RH action. I’m after something off the shelf so I can remove the stock from my PSR rifle replace for farm use. When I come across this ridiculous s...t I tend to vote with my wallet.
Pete
Ok so contact Ken Noye. problem solved
-
- Posts: 576
- Joined: Sat Aug 15, 2015 9:51 pm
Re: Importing Rifle Stocks?
sungazer wrote:I kind of like the Cerus stocks from the US but the exchange rate would make them pretty expensive. I would like a butt stock like on a F open rifle but the beaver tail type long forarm as it would be a Fstd of a bipod rifle. In a nice wood the lamination's like the Cerus seem to be a good compromise of classic look but still with the strength of a laminate.
The yanks love them and I hear they are looking at trying to get a foothold here, but the market would be small given what I suspect the price would be.
-
- Posts: 1519
- Joined: Mon Nov 14, 2005 8:22 pm
Re: Importing Rifle Stocks?
sungazer wrote:I kind of like the Cerus stocks from the US but the exchange rate would make them pretty expensive. I would like a butt stock like on a F open rifle but the beaver tail type long forarm as it would be a Fstd of a bipod rifle. In a nice wood the lamination's like the Cerus seem to be a good compromise of classic look but still with the strength of a laminate.
I have access to Cerus stocks but a Cerus finished with basic timber and hardware would work out around 3 grand, if you want exotic timber, and adjustable LOP etc, it goes up from there.
If anyone is interested please contact me, I need an minimum order of 4 stocks to make it viable.
Matt Paroz
0402230877
Who is online
Users browsing this forum: No registered users and 21 guests