My Davies Match Trigger is supposed to be lubricated with mineral turps. Perhaps unfortunately, I wandered on to a site where the recommendation for other Davies triggers, was "Break Free".
What does the Forum think? Stick to turps? "Break Free", according to google has a seemingly vague description that leaves me confused. Is there a specific brand that the Forum likes, if it is a better lube?
Davies Match Trigger
Moderator: Mod
-
- Posts: 1384
- Joined: Tue Aug 24, 2010 12:11 pm
Re: Davies Match Trigger
The instructions say to clean with turps, not lubricate.
Lubricate with break Free. If you cannot obtain break free then use WD 40 or similar, but use sparingly.
Lubricate sear faces with graphite grease or a good quality HP grease.Again use sparingly.
Barry
Lubricate with break Free. If you cannot obtain break free then use WD 40 or similar, but use sparingly.
Lubricate sear faces with graphite grease or a good quality HP grease.Again use sparingly.
Barry
Return to “Equipment & Technical”
Who is online
Users browsing this forum: Joe308 and 87 guests