Jongmans Action

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Message
Author
Robin
Posts: 3
Joined: Sun Apr 07, 2019 8:09 am

Jongmans Action

#1 Postby Robin » Thu Feb 06, 2020 9:00 am

Hi Folks, your thoughts please. I have been offered a brand new Jongmans action for $2600. I shoot F/std with a Jongmans and love it but it is getting a bit worn, 1982 verson. Would I be crazy to buy or should I build a new one? If a new one, what make of action/trigger/barrel should I look at? My budget would be around $4000, not including scope . :-k Cheers. Robin

Weairy
Posts: 426
Joined: Tue Jul 17, 2018 1:43 pm
Location: Seymour, Vic

Re: Jongmans Action

#2 Postby Weairy » Thu Feb 06, 2020 2:45 pm

If $4k is your budget, a good secondhand Barnard P would be a great option. They’re a very solid and reliable action and very common. Or even new, but new would set you back closer to $5k with a stock etc. standard trigger in that would be fine.

I highly recommend a Krieger barrel by David Brewster personally; we’ve run a bunch of these now and they’ve always keyhole-cut at 300yd in both 308 and 6BR.
My two cents and I’m sure others will have different ideas!
Josh Weaire

KHGS
Posts: 937
Joined: Thu Oct 20, 2005 12:46 am
Location: Cowra NSW

Re: Jongmans Action

#3 Postby KHGS » Thu Feb 06, 2020 3:59 pm

Robin wrote:Hi Folks, your thoughts please. I have been offered a brand new Jongmans action for $2600. I shoot F/std with a Jongmans and love it but it is getting a bit worn, 1982 verson. Would I be crazy to buy or should I build a new one? If a new one, what make of action/trigger/barrel should I look at? My budget would be around $4000, not including scope . :-k Cheers. Robin


Barnard all the way, no contest, and cheaper too!!
Keith H.

Matt P
Posts: 1519
Joined: Mon Nov 14, 2005 8:22 pm

Re: Jongmans Action

#4 Postby Matt P » Fri Feb 07, 2020 3:17 pm

Is the $2600 for the action only ?? If so go the Barnard path, RRP for a PE action with trigger $2123.
I've had a few Jongmans through my shop and some of the issues I've seen, could never recommend one. In fact I'd recommend an Omark with an adaptor over it.
Give me a call if you'd like any more info.
Matt Paroz
0402230877

Robin
Posts: 3
Joined: Sun Apr 07, 2019 8:09 am

Re: Jongmans Action

#5 Postby Robin » Sun Mar 15, 2020 9:28 pm

Thank you gents. Appreciate your advice.


Return to “Equipment & Technical”

Who is online

Users browsing this forum: No registered users and 130 guests