I decided to revive this old post rather than starting a new one.
This is just for information, I don't have have one of these.
I still don't believe case weight measurement is a reliable way to batch cases and thereby infer case volume, there are just too many other possibilities for a change in weight that are not related to volume. Case rim thickness being an obvious one.
The holy grail would be to be able to actually measure case volume at any stage of the reloading process, even with new primers. That would necessitate it being a dry process.
Well a dry process has been developed by Bison Armory (USA)
https://bisonarmory.com/bison-armory-case-volume-gauge/There a two Youtube links towards the bottom of the page to show how it works.
I think it solves the problem, even though it is not a direct volume measurement (it is using pressure transducers to measure a change in pressure when a known volume of air is pushed into a cartridge case; it calculates volume against a calibration). This is temperature sensitive so all measurement has to be done under the same conditions.
Keith Glasscock (a US Shooter) will have a review on his Youtube site soon,
https://youtube.com/channel/UCoXDt-qeFpLSEFf06E0yT7A or sooner for Patreon supporters
Pete