300 Blackout fired in .223
Moderator: Mod
-
- Posts: 117
- Joined: Fri Jul 15, 2005 6:05 pm
- Location: Wagga Wagga, Australia
300 Blackout fired in .223
From Accurate Shooter forum with photo of disintegrated rifle action.
https://forum.accurateshooter.com/threa ... t-38044681
https://forum.accurateshooter.com/threa ... t-38044681
-
- Posts: 2900
- Joined: Sun Jun 19, 2005 4:07 pm
Re: 300 Blackout fired in .223
another good reason not to have a 300 blackout.
bruce.
bruce.
"SUCH IS LIFE" Edward Kelly 11 nov 1880
http://youtu.be/YRaRCCZjdTM
http://youtu.be/YRaRCCZjdTM
-
- Posts: 2323
- Joined: Sun Feb 12, 2006 7:23 pm
- Location: Singleton NSW
Re: 300 Blackout fired in .223
bruce moulds wrote:another good reason not to have a 300 blackout.
bruce.
Or not have a 223
-
- Posts: 696
- Joined: Sun Mar 11, 2012 4:31 pm
Re: 300 Blackout fired in .223
bruce moulds wrote:another good reason not to have a 300 blackout.
bruce.
What are the others Bruce? I don't have any difficulty distinguishing between the two.
Barry
-
- Posts: 2900
- Joined: Sun Jun 19, 2005 4:07 pm
-
- Posts: 544
- Joined: Sun Feb 24, 2019 2:33 pm
- Location: Chinchilla
Re: 300 Blackout fired in .223
bruce moulds wrote:what use is the cartridge barry?
bruce.
We needed something to replace the 310 cadet, for really efficient people
-
- Posts: 696
- Joined: Sun Mar 11, 2012 4:31 pm
Re: 300 Blackout fired in .223
bruce moulds wrote:what use is the cartridge barry?
bruce.
I use it for knocking over silhoutte targets - or attempting to!
-
- Posts: 346
- Joined: Wed May 28, 2014 11:48 pm
Re: 300 Blackout fired in .223
300AAC is a very good round. The power of a 30-30 Winchester that shoots flatter because of better bullets. Running the old 30-30 Winchester out of a lever gun vs a the AAC out of a compact bolt gun or a AR? I'll take the AAC.
I built a AR15 in 300AAC for my son. He used it last year for deer hunting. He did his job placing the shot well and the 135gr bullet did it's job on the deer.
Yes you have to becareful...in some cases you can get a 300AAC to chamber in a 223 chamber and if you pull the trigger....well you get the picture.
That being said it goes back to what your shooting and paying attention to what you are doing. I was at the range last year and caught a group of 3 guys trying to load 6.5PRC ammo into a 6.5CM bolt gun! Those are 3 guys who should take up bowling and shouldn't own a gun period in my opinion!
Later, Frank
Bartlein Barrels
I built a AR15 in 300AAC for my son. He used it last year for deer hunting. He did his job placing the shot well and the 135gr bullet did it's job on the deer.
Yes you have to becareful...in some cases you can get a 300AAC to chamber in a 223 chamber and if you pull the trigger....well you get the picture.
That being said it goes back to what your shooting and paying attention to what you are doing. I was at the range last year and caught a group of 3 guys trying to load 6.5PRC ammo into a 6.5CM bolt gun! Those are 3 guys who should take up bowling and shouldn't own a gun period in my opinion!
Later, Frank
Bartlein Barrels
-
- Posts: 696
- Joined: Sun Mar 11, 2012 4:31 pm
Re: 300 Blackout fired in .223
Frank Green wrote: you have to becareful...in some cases you can get a 300AAC to chamber in a 223 chamber and if you pull the trigger....well you get the picture
Exactly Frank. And how smart do youneed to be to avoid tnis. Not very.....
-
- Posts: 2900
- Joined: Sun Jun 19, 2005 4:07 pm
-
- Posts: 2323
- Joined: Sun Feb 12, 2006 7:23 pm
- Location: Singleton NSW
Re: 300 Blackout fired in .223
bruce moulds wrote:barry,
how does it go knocking down rams at 500m?
bruce.
Bang............................................................................Ting
-
- Posts: 427
- Joined: Thu Sep 01, 2016 6:55 pm
Re: 300 Blackout fired in .223
where did this happen ?
aus or "merica ?
aus- what range ?
aus or "merica ?
aus- what range ?
Australian's Against "Gun-A-Phobia"
-
- Posts: 2900
- Joined: Sun Jun 19, 2005 4:07 pm
Re: 300 Blackout fired in .223
RDavies wrote:bruce moulds wrote:barry,
how does it go knocking down rams at 500m?
bruce.
Bang............................................................................Ting
7mmstw.
bang..clang
bruce.
-
- Posts: 696
- Joined: Sun Mar 11, 2012 4:31 pm
Re: 300 Blackout fired in .223
bruce moulds wrote:barry,
how does it go knocking down rams at 500m?
bruce.
G'day Bruce. Shoot mine in a T/C so it only has to knock them over at 200. Quite effective at that range.
-
- Posts: 2900
- Joined: Sun Jun 19, 2005 4:07 pm
Re: 300 Blackout fired in .223
hi barry,
aeons ago i shot a std 308 win in a bolt action pistol.
that handled rams at 200 well.
another guy used a 308x1.5, and that sometimes rang a ram.
however i am not sure to what level he loaded it.
bruce.
aeons ago i shot a std 308 win in a bolt action pistol.
that handled rams at 200 well.
another guy used a 308x1.5, and that sometimes rang a ram.
however i am not sure to what level he loaded it.
bruce.
Return to “Equipment & Technical”
Who is online
Users browsing this forum: No registered users and 124 guests