I’m chasing a bit of advice on what the cracking in the attached photo could be and wether or not it’s safe to shoot? I’d lean towards not being safe but I’m no gunsmith. The cracks start about an inch from the throat and are present most of the way along the barrel.
For context, it’s a friends Sako S20 in 6.5 PRC with about 800 rounds through it. Interestingly I have the same rifle and when I put the bore scope in mine it was exactly the same.
Cracking in Barrel???
Moderator: Mod
-
- Posts: 108
- Joined: Sun Dec 20, 2020 8:53 pm
Cracking in Barrel???
You do not have the required permissions to view the files attached to this post.
-
- Posts: 1284
- Joined: Mon Dec 29, 2008 10:29 pm
Re: Cracking in Barrel???
Its hard to tell from a photo but you see lines like that in button or hammer forged barrels. Barrels are drilled then honed and the transverse lines are left over from the honeing process.
-
- Posts: 544
- Joined: Sun Feb 24, 2019 2:33 pm
- Location: Chinchilla
Re: Cracking in Barrel???
I'd say button chatter not cracking, some factory barrels look like a corrugated road
-
- Posts: 108
- Joined: Sun Dec 20, 2020 8:53 pm
Re: Cracking in Barrel???
BATattack wrote:Its hard to tell from a photo but you see lines like that in button or hammer forged barrels. Barrels are drilled then honed and the transverse lines are left over from the honeing process.
It is hard to see in the photo but there is a distinctive crack in the shape of an X which goes through the lands and grooves. Are we looking at the same thing?
-
- Posts: 544
- Joined: Sun Feb 24, 2019 2:33 pm
- Location: Chinchilla
Re: Cracking in Barrel???
Yeah, I probably still think it's a scratch or mark as opposed to a crack, however if your concerned take it to a GOOD gunsmith for an inspection, we're looking at a photo of a photo
-
- Posts: 68
- Joined: Sun Jan 05, 2020 11:08 am
- Location: Sydney NSW
Re: Cracking in Barrel???
The cracking that I can see appears to be fire cracking. This occurs as the barrel wears. 6.5 PRC is a relatively hot round and it seems like this is simply the barrel wearing out.
Matt M.
Endeavour RC
TR/F Standard/Smallbore/Service Rifles/Sporting Rifles etc
LOVE IT ALL!!!
Endeavour RC
TR/F Standard/Smallbore/Service Rifles/Sporting Rifles etc
LOVE IT ALL!!!
-
- Posts: 117
- Joined: Tue Sep 08, 2020 9:40 pm
Re: Cracking in Barrel???
"I see dead people" Even zoomed in I see the X Jimmy is talking about..
Just out of curiosity if the same mark is in both barrels and it is along the barrel as you push the bore scope down.. There isn't a fine crack in the bore scope mirror and only showing with the zoom of the scope cam?
Dave
Just out of curiosity if the same mark is in both barrels and it is along the barrel as you push the bore scope down.. There isn't a fine crack in the bore scope mirror and only showing with the zoom of the scope cam?
Dave
-
- Posts: 108
- Joined: Sun Dec 20, 2020 8:53 pm
Re: Cracking in Barrel???
Daveh wrote:"I see dead people" Even zoomed in I see the X Jimmy is talking about..
Just out of curiosity if the same mark is in both barrels and it is along the barrel as you push the bore scope down.. There isn't a fine crack in the bore scope mirror and only showing with the zoom of the scope cam?
Dave
Nah they are definitely different cracks Dave but I know what you’re saying mate! I’ve got a few sakos so actually checked a couple more and the cracks were only in the S20’s.
-
- Posts: 69
- Joined: Sun Feb 04, 2018 11:07 pm
-
- Posts: 1294
- Joined: Fri Sep 28, 2012 9:26 pm
Re: Cracking in Barrel???
Looks like a good dose of fire cracking (aka, a form if barrel wear).
Overbore cartridges are prone to seeing this much earlier in their life.
Overbore cartridges are prone to seeing this much earlier in their life.
-
- Posts: 35
- Joined: Tue Dec 22, 2020 6:48 pm
- Location: Shoalhaven
Re: Cracking in Barrel???
I have found something similar in one of my hammer forged barrels, few cracks throughout the barrel at various points. Returned to importer for inspection by gunsmith and was advised this is normal, nothing wrong with it. It's not the most accurate barrel unfortunately.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 605
- Joined: Tue Oct 16, 2018 5:20 pm
- Location: 7321 Tas.
Re: Cracking in Barrel???
Bobcat wrote:I have found something similar in one of my hammer forged barrels, few cracks throughout the barrel at various points. Returned to importer for inspection by gunsmith and was advised this is normal, nothing wrong with it. It's not the most accurate barrel unfortunately.
That's Normal? Bullshit!
Looks to me that it's deeper than the land thickness as it's in both land and groove.
The problem here is it's not what you can see, it's what you can't see. How deep is the crack?,Is it growing over time? if you don't know the answer you're just guessing about the safety of the barrel.
To be sure the barrel would need to be magnafluxed - I'm betting the gunsmith didn't do that.
Pete
Return to “Equipment & Technical”
Who is online
Users browsing this forum: No registered users and 12 guests