help needed

Get or give advice on equipment, reloading and other technical issues.

Moderator: Mod

Message
Author
crocket77
Posts: 1
Joined: Sat Jul 05, 2008 10:02 pm

help needed

#1 Postby crocket77 » Tue Jul 08, 2008 4:02 pm

hello all could someone help me with range elevations for 7.62 at 44.5 grn 2206H scope is tasco at 18x turret movment 1/8 click zeroed at 300 yds as new to this its confusing to adjust for different ranges :?:
yours sin crocket

Guest

#2 Postby Guest » Tue Jul 08, 2008 4:53 pm

Crocket,
Approximate elevations from 300 yd zero are--

400--3.5 moa ( 1m0a = 8 clicks on your scope )
500-- 6.25 moa
600--9.5 moa
700--13 moa
800--18 moa
900--23 moa
1000--29 moa.
Will vary slightly depending on MV
Barry

stu_bear2002
Posts: 186
Joined: Fri Jun 16, 2006 10:01 pm
Location: Bribie Island QLD

#3 Postby stu_bear2002 » Wed Jul 23, 2008 10:51 am

G'day crocket,
in addition to barry's reply if you know(or close to) your muzzle vel you could download a program called pointblank and enter all your info into it and it will calculate trajectory, energy, windage etc and you can print a "come up card".
if your not sure of your velocity i'm sure there are people at your range who would have a chrony to help you out.
there is also another calculator that i've used to print cards for my hunting rifles that is pretty good located at http://www.eskimo.com/~jbm/calculations/calculations.html
regards stuart
Stiller/holeshot .22LR
Bruno mod2(sleeved) .22LR
Rem7(sleeved) 6mmBR and 6mm Dasher
Stolle panda 6PPC
Winchester 101 12g


Return to “Equipment & Technical”

Who is online

Users browsing this forum: Drop shot and 21 guests