Hi all,
Who can recommend what in a rear-entry style action spanner to suit Rem700 SA?
Or even better, who might have one for sale?
Cheers
Rem700 Action Spanner
Moderator: Mod
-
- Posts: 423
- Joined: Tue Jul 17, 2018 1:43 pm
- Location: Seymour, Vic
-
- Posts: 1050
- Joined: Fri Jun 13, 2008 12:22 am
Re: Rem700 Action Spanner
Josh, BRT have rem 700 rear action tools. or the other ones which cost more are at Huntsmans https://www.huntsmanfirearms.com.au/cat ... riant=1664
https://www.brtshooterssupply.com.au/pr ... rench-rem/
Geoff
https://www.brtshooterssupply.com.au/pr ... rench-rem/
Geoff
-
- Posts: 186
- Joined: Fri Jun 16, 2006 10:01 pm
- Location: Bribie Island QLD
Re: Rem700 Action Spanner
As saum2 said BRT or Hoplon precision sells them also both great guys to deal with.
https://www.hoplon.com.au/collections/a ... ion-wrench
Stuey
https://www.hoplon.com.au/collections/a ... ion-wrench
Stuey
Stiller/holeshot .22LR
Bruno mod2(sleeved) .22LR
Rem7(sleeved) 6mmBR and 6mm Dasher
Stolle panda 6PPC
Winchester 101 12g
Bruno mod2(sleeved) .22LR
Rem7(sleeved) 6mmBR and 6mm Dasher
Stolle panda 6PPC
Winchester 101 12g
-
- Posts: 157
- Joined: Mon Jul 15, 2019 1:44 pm
Re: Rem700 Action Spanner
stu_bear2002 wrote:As saum2 said BRT or Hoplon precision sells them also both great guys to deal with.
https://www.hoplon.com.au/collections/a ... ion-wrench
Stuey
I have a PMA tool action wrench from Hoplon and they are fine (other than they are not stainless steel so need oiling). Two things to note with this style are that you need to add in the cost of a 1/2 in drive 5/8 (or 16mm) 6 sided impact socket and a 1/2 inch drive torque wrench. The torque wrench can do double duty cranking down the barrel vice nuts.
If you are swapping barrels it's a very good idea to get some anti-seize for the threads. Loctite 771 is a common option.
https://www.blackwoods.com.au/lubricant ... p/05893416
-
- Posts: 213
- Joined: Thu Jan 18, 2018 2:56 am
Re: Rem700 Action Spanner
I’ve got the BRT one and it works wells.
Use Nulon L90 on the threads per smiths recommendation.
Use Nulon L90 on the threads per smiths recommendation.
Return to “Equipment & Technical”
Who is online
Users browsing this forum: No registered users and 68 guests