Has anyone devised a spring loaded bolt release pin for the Barnard P.
The twist to release idea is brilliant simplicity but it restricts scope positioning.
I can't be the only one wanting this.
Pete
Barnard bolt release
Moderator: Mod
-
- Posts: 157
- Joined: Mon Jul 15, 2019 1:44 pm
Re: Barnard bolt release
I seem to recall somebody saying Phil Mastin was making a spring loaded one fro Barnards.
-
- Posts: 79
- Joined: Thu Sep 06, 2018 9:46 pm
Re: Barnard bolt release
Pete give us your phone number and i will send you a pic,
There a piece of cake to make , half the size of mastins.
Cheers jacko, 0402317506
There a piece of cake to make , half the size of mastins.
Cheers jacko, 0402317506
-
- Posts: 119
- Joined: Tue Sep 08, 2020 9:40 pm
Re: Barnard bolt release
Pete I made one out of a 60mm long piece of 12mm aluminium rod. Small flat on the outside and a flat with a channel on the action side to locate over the curve of the action.
Two screws to match the threads on the Barnard and a stainless bolt machined down to make the pin. A spring out of a pen cut in half and a little piece of the alloy rod made into a button for the end and it works great.
Bit of messing around for me as I am not a machinist or fitter.
Dave
Two screws to match the threads on the Barnard and a stainless bolt machined down to make the pin. A spring out of a pen cut in half and a little piece of the alloy rod made into a button for the end and it works great.
Bit of messing around for me as I am not a machinist or fitter.
Dave
You do not have the required permissions to view the files attached to this post.
Return to “Equipment & Technical”
Who is online
Users browsing this forum: No registered users and 125 guests