Clean inside and out, no peening (I've not even detected any damage to newly chamfered necks), pockets like new if they were reamed (they tend to hold a bit of crap if they weren't). Pins are 0.047x0.255" I did try larger pins earlier on but found them stuck in flash holes and wedged in necks (I think the wedging issue (and maybe the peening problem) was due to those pins having been cut on a diagonal leaving a pretty sharp point) The pins I found are like needle roller bearing pins with a rounded end. Point to note: That mixed shape media that's available is just a nightmare! I have never found the pins I use to stick anywhere on 222,223,243,6.5x284,303 or 308 cases, but there are occasions where a bunch will need shaking out of the case simply because there are so many inside. It doesn't happen often and you can easily feel the extra weight even with 3 or 4 cases in your hand.
A quick rinse is necessary or surface tarnishing can occur, then an hour or so in the Queensland sun seems to be the most cost effective method to dry (wear sunnies because the cases are mighty shinny
![Cool 8)](./images/smilies/icon_cool.gif)
These tumblers will do
50 x 6.5x284
50-60 x 308/243
100 x 223
I was going to upgrade to one of the larger tumblers but working with the adage that "if it ain't broke, don't fix it" I decided to get 2 more small ones instead. Mainly due to the results, but it also gives me a bit of redundancy if one stuffs up.