Here are a couple of pic's of a set of dies I got on Monday from Short Action Customs. These are set up for 6BRA. I already sized about 20 cases. The sizing die is a neck bushing die. Overall first impression is they are nicely made and there is nothing I can really pick apart on them.
I'll finish loading the ammo sometime this week and hopefully shoot the ammo before Christmas.
Later, Frank
Bartlein Barrels
New Dies from Short Action Customs
Moderator: Mod
-
- Posts: 352
- Joined: Wed May 28, 2014 11:48 pm
New Dies from Short Action Customs
You do not have the required permissions to view the files attached to this post.
Last edited by Frank Green on Fri Dec 20, 2019 12:21 am, edited 1 time in total.
-
- Posts: 576
- Joined: Sat Aug 15, 2015 9:51 pm
Re: New Dies from Short Action Customs
Looks like quality gear Frank. Do you know how far they intend to expand with their calibre line up?
-
- Posts: 224
- Joined: Fri Dec 05, 2014 4:42 am
- Location: Mackay
Re: New Dies from Short Action Customs
willow wrote:Looks like quality gear Frank. Do you know how far they intend to expand with their calibre line up?
If they have gone to the trouble/cost of fitting Mitutoyo tops, then I think you can be assured they are of the highest quality.
-
- Posts: 352
- Joined: Wed May 28, 2014 11:48 pm
Re: New Dies from Short Action Customs
willow wrote:Looks like quality gear Frank. Do you know how far they intend to expand with their calibre line up?
Right now Mark (owner of Short Action Customs) Only has 6GT and 6BRA dies. I know he has 6 Creedmoor in the works and a few others.
I'll reach out to him and see what is in the mix for the future.
Later, Frank
-
- Posts: 352
- Joined: Wed May 28, 2014 11:48 pm
-
- Posts: 247
- Joined: Tue Jul 06, 2010 9:38 pm
- Location: Darwin NT
Re: New Dies from Short Action Customs
Do you have a ball park figure on cost? Also a time frame for the 6CM?
Regards
jb
Regards
jb
-
- Posts: 576
- Joined: Sat Aug 15, 2015 9:51 pm
Re: New Dies from Short Action Customs
Frank Green wrote:willow wrote:Looks like quality gear Frank. Do you know how far they intend to expand with their calibre line up?
Right now Mark (owner of Short Action Customs) Only has 6GT and 6BRA dies. I know he has 6 Creedmoor in the works and a few others.
I'll reach out to him and see what is in the mix for the future.
Later, Frank
A pity I already picked up Redding 6GT dies otherwise I would give these a run.
-
- Posts: 352
- Joined: Wed May 28, 2014 11:48 pm
Re: New Dies from Short Action Customs
flatlina wrote:Do you have a ball park figure on cost? Also a time frame for the 6CM?
Regards
jb
I’ll message him first thing Monday morning and ask him ETA on the 6CM and pricing. Hopefully I can get a answer before Christmas shut down for ya.
Later, Frank
-
- Posts: 352
- Joined: Wed May 28, 2014 11:48 pm
Re: New Dies from Short Action Customs
Here is the pricing I got from Short Action Customs....
Bushing Neck, Full Length Sizing Die. (Any Caliber)...$175
Mitutoyo Micrometer Bullet Seating Die (Any Caliber)...$245
Non-Micrometer Bullet Seating Die (Any Caliber)...$190
Later, Frank
Bushing Neck, Full Length Sizing Die. (Any Caliber)...$175
Mitutoyo Micrometer Bullet Seating Die (Any Caliber)...$245
Non-Micrometer Bullet Seating Die (Any Caliber)...$190
Later, Frank
-
- Posts: 15
- Joined: Sat Jun 08, 2019 7:54 am
- Location: S.E. Qld
-
- Posts: 110
- Joined: Sun Jun 24, 2012 9:12 pm
Re: New Dies from Short Action Customs
Why don't people look up their web site instead of asking Frank all these question?
Return to “Equipment & Technical”
Who is online
Users browsing this forum: Weairy and 101 guests