And my new effy build begins.

If you take a pride in the appearance of your rifle(s) and other gear, post a photo and give us some commentary.

Moderator: Mod

Bigtravoz
Posts: 297
Joined: Sat Apr 22, 2017 7:43 pm
Has thanked: 49 times
Been thanked: 39 times

And my new effy build begins.

Post by Bigtravoz »

Has been coming for a long while but things are starting to happen. Been saving my pennies and working at getting me a decent f-class rig. Life’s hard with a young family, and the dollars are getting close to the desired amount to get the bits I need to get it off the ground, so today I started on my stock. Got a fair bit of the rough shaping done, next step will be the inlet of the action when I get it. Things are starting to get real.
You do not have the required permissions to view the files attached to this post.
Bigtravoz
Posts: 297
Joined: Sat Apr 22, 2017 7:43 pm
Has thanked: 49 times
Been thanked: 39 times

Re: And my new effy build begins.

Post by Bigtravoz »

And progress is happening. Barrel fitted to the action and stock inlet done.
You do not have the required permissions to view the files attached to this post.
Bigtravoz
Posts: 297
Joined: Sat Apr 22, 2017 7:43 pm
Has thanked: 49 times
Been thanked: 39 times

Re: And my new effy build begins.

Post by Bigtravoz »

Don’t know why it is upside down but it is right way up if you click on it.
cheech
Posts: 408
Joined: Wed Jul 15, 2009 11:10 pm
Has thanked: 224 times
Been thanked: 105 times

Re: And my new effy build begins.

Post by cheech »

My first group from my U300
6D4F5DA4-B362-4945-9D75-C2AC854262E4.png
You do not have the required permissions to view the files attached to this post.
Bigtravoz
Posts: 297
Joined: Sat Apr 22, 2017 7:43 pm
Has thanked: 49 times
Been thanked: 39 times

Re: And my new effy build begins.

Post by Bigtravoz »

Ready for the cherry popping. And once again it’s upside down, don’t know what is going on but click on it and it is the right way up.
You do not have the required permissions to view the files attached to this post.
Bigtravoz
Posts: 297
Joined: Sat Apr 22, 2017 7:43 pm
Has thanked: 49 times
Been thanked: 39 times

Re: And my new effy build begins.

Post by Bigtravoz »

So build details, ultimatum u300 action, jewell BR trigger, Krieger 1:8 twist 0.264 30” barrel, stock made by me with a little help from Stephen Butler with the router work on the inletting, Barrel chambered and fitting thanks to David Brewster in 260 ackley, throated to suit 140 Berger hybrids. Trigger from Grenfell armouring. Pillars made on williadas lathe. Bedding stuffed and then fixed by me. Timber work ebonised using a many hundreds of year old technique. I will just add that kiwi neutral boot polish is a perfect release agent, crc dry glide silicone spray is not and should never be used anywhere near a firearm.
AlexE
Posts: 219
Joined: Fri Feb 16, 2018 9:18 am
Has thanked: 2 times
Been thanked: 14 times

Re: And my new effy build begins.

Post by AlexE »

I'd be interested to hear whether you have any stiff bolt lift problems. Seems every report I've read on the u300 is accompanied by a comment on how heavy the bolt lift is.
Bigtravoz
Posts: 297
Joined: Sat Apr 22, 2017 7:43 pm
Has thanked: 49 times
Been thanked: 39 times

Re: And my new effy build begins.

Post by Bigtravoz »

AlexE wrote:I'd be interested to hear whether you have any stiff bolt lift problems. Seems every report I've read on the u300 is accompanied by a comment on how heavy the bolt lift is.


That was amended with all the late model versions which came to Australia. To be honest I don’t think it’s that much heavier than most of the barnard actions I have shot.
Post Reply Previous topicNext topic